Vivotek IB9365-EHT - Page 268

VIVOTEK
268 - User's Manual
minresolution A list of <Integer> 0/7 Represent supported minimum resolution of
each stream in current video mode.
* The element number is defined as
"capability_nmediastream".
* We support this parameter when the version
number (httpversion) is equal or greater than
0304b.
maxframerate A list of <Integer> 0/7 Indicate frame rate that the video source
outputs in current video mode.
Onetoone mappingtotheresolutionin
"resolution".

*Theelementnumberisdefinedas
"nresolution"inthisgroup.
*Thisparametermaybechangedwhen
"videoin_c<n>_cmosfreq"=50or
"videoin_c<n>_modulation"=pal.
Ex:30fpsis changedto25fps,60fpsischanged
to50fps,andsoon.
mjpeg_maxframerate A list of <Positive
Integer> and "-"
0/7 Maximum fps that the device can encoded with
MJPEG on resolutions in current video mode.
"-" means not support.
* One to one mapping to the resolution in
"resolution".
* The element number is defined as
"nresolution" in this group.
* This parameter may be changed when
"videoin_c<n>_cmosfreq"=50 or
"videoin_c<n>_modulation"=pal.
Ex: 30 fps is changed to 25 fps, 60 fps is
changed to 50 fps, and so on.
* Only available when 'mjpeg' is listed in
"capability_videoin_codec".