EasyManua.ls Logo

Vivotek IB9367-EHT-v2 - Page 183

Vivotek IB9367-EHT-v2
442 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VIVOTEK
User's Manual - 183
© 2020 VIVOTEK INC. All Right Reserved
43
NAME VALUE
SECURITY
(get/set)
DESCRIPTION
normalstate open,
grounded
1/1 Indicate open circuit or closed circuit
(inactive status)
7.5 Security
Group: security
NAME VALUE
SECURITY
(get/set)
DESCRIPTION
privilege_do
view, operator,
admin
1/6 Indicate which privileges and above
can control digital output
(capability_ndo > 0)
privilege_camctrl
view, operator,
admin
1/6 Indicate which privileges and above
can control PTZ
(capability_ptzenabled > 0 or
capability_eptz > 0 or
capability_fisheye > 0)
user_i0_name string[64] 6/7 User name of root
user_i<1~20>_name string[64] 6/7 User name
user_i0_pass password[64] 7/6 Root password
user_i<1~20>_pass password[64] 7/6 User password
user_i0_privilege view,
operator,
admin
6/7 Root privilege
user_i<1~20>_ privilege
view,
operator,
admin
6/6 User privilege
7.6 Network
Group: network
NAME VALUE SECURITY
(get/set)
DESCRIPTION
preprocess <positive integer> 6/6 An 32-bit integer, each bit can be set
separately as follows:
Bit 0 => HTTP service;
Bit 1=> HTTPS service;
© 2020 VIVOTEK INC. All Right Reserved
44
NAME VALUE SECURITY
(get/set)
DESCRIPTION
Bit 2=> FTP service;
Bit 3 => Two way audio and RTSP
Streaming service;
To stop service before changing its port
settings. It’s recommended to set this
parameter when change a service port
to the port occupied by another service
currently. Otherwise, the service may
fail.
Stopped service will auto-start after
changing port settings.
Ex:
Change HTTP port from 80 to 5556, and
change RTP port for video from 5556 to
20480.
Then, set preprocess=9 to stop both
service first.
”/cgi-bin/admin/setparam.cgi?
network_preprocess=9&network_http_
port=5556&
network_rtp_videoport=20480”
type lan,
pppoe
6/6 Network connection type.
resetip <boolean> 6/6 1 => Get ipaddress, subnet, router,
dns1, dns2 from DHCP server at next
reboot.
0 => Use preset ipaddress, subnet,
rounter, dns1, and dns2.
ipaddress <ip address> 6/6 IP address of server.
subnet <ip address> 6/6 Subnet mask.
router <ip address> 6/6 Default gateway.
dns1 <ip address> 6/6 Primary DNS server.
dns2 <ip address> 6/6 Secondary DNS server.
wins1 <ip address> 6/6 Primary WINS server.

Related product manuals