Vivotek IB9367-EHT-v2 - Page 230

VIVOTEK
230 - User's Manual
© 2020 VIVOTEK INC. All Right Reserved
91
NAME VALUE SECURITY
(get/set)
DESCRIPTION
<Not
recommended to
use this>
day,
night,
di,
schedule…etc
* Available values are
listed in
"capability_daynight_
c<0~(n-1)>_mode"
<product dependent>
* We replace this parameter with
“ircutcontrol_c0_mode” when the
version number (httpversion) is equal
or greater than 0312a.
* We do not support this parameter
when "capability_nvideoin > 1".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
sir
<product
dependent>
<Not
recommended to
use this>
<boolean> 6/6 Enable/disable Smart IR* Only
available when
"capability_daynight_c<0~"capability_
nvideoin"-1>_smartir" is 1
* We replace this parameter with
“ircutcontrol_c<0~(n-1)>_sir” when
the version number (httpversion) is
equal or greater than 0312a.
* We do not support this parameter
when "capability_nvideoin > 1".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
daymodebegintime
<Not
recommended to
use this>
00:00~23:59 6/6 Day mode begin time
* We replace this parameter with
“ircutcontrol_c<0~(n-1)>_daymodebe
gintime” when the version number
(httpversion) is equal or greater than
0312a.
* We do not support this parameter
when "capability_nvideoin > 1".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
daymodeendtime
<Not
recommended to
00:00~23:59 6/6 Day mod end time
* We replace this parameter with
“ircutcontrol_c<0~(n-1)>_daymodeen