Vivotek IB9367-EHT-v2 - Page 291

VIVOTEK
User's Manual - 291
© 2020 VIVOTEK INC. All Right Reserved
151
NAME VALUE SECURITY
(get/set)
DESCRIPTION
than 0, it means that the camera
supports edge recording function.
bit 0 : It supports to record directly to
an on-board SD-Card.
bit 1~: Currently, they are reserved
bit, and the default value is 0.
* Only available when
"capability_supportsd" is 1 or
"capability_storage_dbenabled" is 1.
localstorage_slcon
num
0,<positive integer> 0/7 The maximum seamless connection
number for each channel.
* Only available when
"capability_supportsd" is 1 or
"capability_storage_dbenabled" is 1.
localstorage_smart
sd
<boolean> 0/7 The "Lifetime and Log SD Card"
feature allows users to obtain the
card's remaining lifetime information.
0: Non-support this feature
1: Support this feature
* Only Sony, Micron SD card can
support this function now.
* Only available when
"capability_supportsd" is 1 or
"capability_storage_dbenabled" is 1.
remotecamctrl_ma
ster
0, <positive integer> 0/7 Indicate whether to support remote
auxiliary camera (master side), this
value means supporting max number
of auxiliary camera.
remotecamctrl_sla
ve
<boolean> 0/7 Indicate whether to support remote
camera control (slave side).
fisheyelocaldewarp
_c<0~(capability_n
videoin)-1>
<product
dependent>
0, <positive integer> 0/7 Indicate the supported streams of
local dewarp. One bit represents
one supported stream. The LSB
indicates stream 0.
Ex: “3” means stream 0 and stream 1
support local dewarp.
© 2020 VIVOTEK INC. All Right Reserved
152
NAME VALUE SECURITY
(get/set)
DESCRIPTION
* Only available when
"capability_fisheye" > 0
shockalarm_suppo
rt
<boolean> 0/7 Indicate whether to support the shock
detection.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0306e.
layout_redirection <string> 0/7 Indicate which function will be
redirected to the vadp package path.
"-": Not supported.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0309a.
securecam_suppor
t
<Boolean> 0/7 Indicate support for security camera.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0314a.
securecam_version <string> 0/7 Indicate the security camera feature
phases.
* Only available when
capability_securecam_support=1.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0314a.
taics_support <boolean> 0/7 Support the feature for Video
Surveillance System Security from
TAICS.
* We support this parameter when
the version number (httpversion) is
equal or greater than 0314b.
taics_level 0, <positive integer> 0/7 Indicate the support level for Video
Surveillance System Security from
TAICS.
* Only available when
"capability_taics_support" is 1.
* We support this parameter when