EasyManua.ls Logo

Vivotek IB9367-EHT-v2 - Page 297

Vivotek IB9367-EHT-v2
442 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VIVOTEK
User's Manual - 297
© 2020 VIVOTEK INC. All Right Reserved
157
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
minfocus 0, <positive integer>
0/7 The lower limit for focus position.
*Only available when the value of
"capability_camctrl_c<0~(n-1)>_zoomm
odule" is "1"
maxfocus 0, <positive integer>
0/7 The upper limit for focus position.
*Only available when the value of
"capability_camctrl_c<0~(n-1)>_zoomm
odule" is "1"
7.27.3 Capability for IR Led
Group: capability_daynight_c<0~(n-1)> n denotes the value of "capability_nvideoin"
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
support <boolean> 0/7 Indicate whether the camera supports
day/night mode switch
builtinir
<boolean> 0/7 Indicate whether to support built-in IR
led.
* We replaced this parameter with
capability_daynight_illuminators_builti
n_support” when the version number
(httpversion) is equal or greater than
0312a.
builtinwled
<boolean> 0/7 Indicate whether to support built-in
white led.
* We replaced this parameter with
capability_daynight_illuminators_builti
n_type=whiteled” when the version
number
(httpversion) is equal or greater
than 0312a.
© 2020 VIVOTEK INC. All Right Reserved
158
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
externalir
<boolean> 0/7 Indicate whether to support external IR
led.
* We replaced this parameter with
capability_daynight_illuminators_exter
nal_support” when the version number
(httpversion) is equal or greater than
0312a.
optimizedir
<boolean> 0/7 Indicate whether to support optimized
IR control technology.
* We replaced this parameter with
capability_daynight_illumintators_opti
mizedir” when the version number
(httpversion) is equal or greater than
0312a.
smartir <boolean> 0/7 Indicate whether to support smart IR.
ircutfilter <boolean> 0/7 Indicate whether to support IR cut.
lightsensor <boolean> 0/7 Indicate whether to support light
sensor.
blackwhitemode <boolean> 0/7 Indicate whether to support
automatically switch to Black & White
display during the night mode.
* We support this parameter when the
version number
(httpversion) is equal or
greater than 0302a.

Related product manuals