Vivotek IB9367-EHT-v2 - Page 311

VIVOTEK
User's Manual - 311
© 2020 VIVOTEK INC. All Right Reserved
171
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
fisheye_mounttype
<Not recommended
to use this>
ceiling, wall, floor
<product
dependent>
0/7 Indicate the supported type.
wall mount: 180° panoramic view
ceiling mount: 360° surround view without
blind spots
floor mount: 360° surround view without
blind spots
* Only available when "capability_fisheye" >
0
* It's recommended to use
"capability_videoin_c<0~(n-1)>_mounttype"
mounttype ceiling, wall,
floor,-
<product
dependent
* Available values
are listed in "
capability_videoin
_c<0~(n-1)>_mou
nttype "
0/7 Indicate the supported mount type.
"-": not support
* We support this parameter when the
version number (httpversion) is equal or
greater than 0309c.
dintraperiod_support
<boolean> 0/7 0: Non-support "Dynamic intra frame
period"
1: Support "Dynamic intra frame period"
"Dynamic intra frame period" can be used
to reduce bitrate by reducing the number of
I-frame.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0301c.
© 2020 VIVOTEK INC. All Right Reserved
172
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
cameraunit_name CU8131,
CU8171,
CU8161-H,
CU8162-H,
CU8163-H,
CU8361-H,
...,
-
<product
dependent>
0/7 A "camera unit" name of a split-
type camera
system, which the camera unit and the
video core are separated.
-: If the camera is not a split-type camera
system, the value of this parameter is "-".
* We support this parameter when the
version number (httpversion) is equal or
greater than 0302b.
cmosfreq_support <boolean> 0/7 0: The power line frequency(50/60Hz) is
detected by camera automatically.
1: The power line frequency(50/60Hz) can
be set by user.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0308a.
smartfps_support <boolean> 0/7 Indicate whether to support Smart fps
function.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0309a.
smartq_support <boolean> 0/7 Indicate whether to support Smart Q
function.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0309a.
7.27.7 Capability for Local Dewarp
Group: capability_videoin_c<0~(n-1)>_localdewarp
(capability_fisheyelocaldewarp_c<0~(capability_nvideoin)-1> > 0)
n denotes the value of "capability_nvideoin"
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
typeceilingmount 1O, 1P, 2P, 1R, 4R 0/7 Available dewarp types of ceiling and
floor mount.