Vivotek IB9367-EHT-v2 - Page 353

VIVOTEK
User's Manual - 353
© 2020 VIVOTEK INC. All Right Reserved
213
7.31 Recording
Group: recording_i<0~(n-1)> n denotes the value of "capability_nrecording"
(capability_nrecording > 0)
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
name string[40] 6/6 Identification of this entry.
trigger schedule,
networkfail
6/6 The event trigger type
schedule: The event is triggered by
schedule
networkfail: The event is triggered by
the failure of network connection.
enable <boolean> 6/6 Enable or disable this recording.
priority 0, 1, 2 6/6 Indicate the priority of this recording:
“0” indicates low priority.
“1” indicates normal priority.
“2” indicates high priority.
channel 0~"capability_nvideoin"-1
6/6 Indicate the source of recording
channel.
0 means the first channel.
1 means the second channel.
2 means the third channel.
3 means the fourth channel.
* We support this parameter when the
version number (httpversion) is equal or
greater than 0311c.
source 0~"capability_nmediastrea
m"-1
6/6 Indicate the source of media stream.
0 means the first stream.
1 means the second stream and so on.
© 2020 VIVOTEK INC. All Right Reserved
214
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
maxretentiontime <string> 6/6 To specify the expired time for
automatic clean up, and it only takes
effect for video clip generated by
recording_i <0~1>.
Format is
“‘P[Y]Y[MM]M[DDD]DT[hh]H[mm]M[ss]
S’
, similar with ISO8601 with symbols P
Ex. P7D, it means 7 days. P1DT10H, it
means 1 days and 10 hours.
The parameter takes effect when
autocleanup_
maxretentiontime_recording_enabled
is enabled.
notify <boolean> 6/6 0: Disable recording notification
1: Enable recording notification
notifyserver 0~31 6/6 Indicate which notification server is
scheduled.
One bit represents one application
server (server_i0~i4).
bit0 (LSB) = server_i0.
bit1 = server_i1.
bit2 = server_i2.
bit3 = server_i3.
bit4 = server_i4.
For example, enable server_i0,
server_i2, and server_i4 as notification
servers; the notifyserver value is 21.