Vivotek IB9367-EHT-v2 - Page 361

VIVOTEK
User's Manual - 361
© 2020 VIVOTEK INC. All Right Reserved
221
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
preset_i<0~19>_size <WxH>
<product
dependent>
1/7 Width and height of the preset.
(It should be set by ePreset.cgi rather
than by setparam.cgi.)
7.36 Focus Window Setting
Group: focuswindow_c<0~(n-1)> for n channel products
n denotes the value of "capability_nvideoin".
(capability_image_c<0~(n-1)>_focuswindow_nwindow > 0)
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
win_i0_enable <boolean> 4/4 Enable or disable the window.
win_i0_home <W,H>
<product
dependent>
4/4 Left-top corner coordinate of the
window.
* If the minimal window size is 192x144,
then the
"win_i0_home"=(0~resolution_W-192,
0~resolution_H-144), resolution_W and
resolution_H based on
"capability_image_
c<0~(n-1)>_focuswindow_range" .
win_i0_size <WxH>
<product
dependent>
4/4 Width and height of the window.
* The minimal window size is 192x144,
and resolution_W and resolution_H is
based on "capability_image_
c<0~(n-1)>_focuswindow_range" .
7.37 Seamless Recording Setting
<Not recommended to use>
Group: seamlessrecording
(capability_localstorage_seamless> 0)
* We do not support this parameter when "capability_nvideoin > 1".
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
© 2020 VIVOTEK INC. All Right Reserved
222
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
diskmode seamless,
manageable
1/6 “seamless” indicates enable seamless
recording.
“manageable” indicates disable seamless
recording.
* We replace this parameter with
“seamlessrecording_c<0~(n-1)>_diskmode”
when the version number (httpversion) is
equal or greater than 0312a.
* We do not support this parameter when
"capability_nvideoin > 1".
* This parameter will not be used after the
version number (httpversion) is equal or
greater than 0400a.
maxconnection 3 1/7 Maximum number of connected seamless
streaming.
* We replace this parameter with
“seamlessrecording_c<0~(n-1)>_maxconnecti
on” when the version number (httpversion) is
equal or greater than 0312a.
* We do not support this parameter when
"capability_nvideoin > 1".
* This parameter will not be used after the
version number (httpversion) is equal or
greater than 0400a.
enable <boolean> 1/7 Indicate whether seamless recording is
recording to local storage or not at present.
(Read only)
* We replace this parameter with
“seamlessrecording_c<0~(n-1)>_triggerrecord
” when the version number (httpversion) is
equal or greater than 0312a.
* We do not support this parameter when
"capability_nvideoin > 1".
* This parameter will not be used after the
version number (httpversion) is equal or
greater than 0400a.