Vivotek IB9367-EHT-v2 - Page 373

VIVOTEK
User's Manual - 373
© 2020 VIVOTEK INC. All Right Reserved
233
NAME VALUE SECURITY
(get/set)
DESCRIPTION
* Available values are
listed in
"capability_camctrl_c
<0~(n-1)>_focusmod
e"
preset_i<0~(k-1)>_name
string[40] 1/4 Name of the preset location.
preset_i<0~(k-1)>_pan capability_ptz_c<0~(
n-1)>_minpan ~
capability_ptz_c<0~(
n-1)>_maxpan
1/4 Pan position at each preset
location.
preset_i<0~(k-1)>_tilt capability_ptz_c<0~(
n-1)>_mintilt ~
capability_ptz_c<0~(
n-1)>_maxtilt
1/4 Tilt position at each preset
location.
preset_i<0~(k-1)>_zoom
capability_ptz_c<0~(
n-1)>_minzoom ~
capability_ptz_c<0~(
n-1)>_maxzoom
1/4 Zoom position at each preset
location.
preset_i<0~(k-1)>_focus
capability_ptz_c<0~(
n-1)>_minfocus ~
capability_ptz_c<0~(
n-1)>_maxfocus
1/4 Focus position at each preset
location.
preset_i<0~(k-1)>_focus
setting
sync,
fixcurrent
1/4 The focus mode of each preset,
which is essential and should be
grouped with
“preset_i<0~(k-1)>_name.”
* We support this parameter
when the version number
(httpversion) is equal or greater
than 0305b.
preset_i<0~(k-1)>_fliped
<boolean> 1/4 Flip side at each preset location.
patrol_i<0~39>_name string[40] 1/4 (For internal device)
The name of patrol location
patrol_i<0~39>_
dwelling
0 ~ 999 1/4 (For internal device)
The dwelling time of each patrol
location
© 2020 VIVOTEK INC. All Right Reserved
234
NAME VALUE SECURITY
(get/set)
DESCRIPTION
disablemdonptz <boolean> 1/4 Disable motion detection on PTZ
operation.
defaulthome <boolean> 1/4 This field tells system to use
default home position or not.
axisx capability_ptz_c<0~(
n-1)>_minpan ~
capability_ptz_c<0~(
n-1)>_maxpan
1/4 Custom home pan position.
axisy capability_ptz_c<0~(
n-1)>_mintilt ~
capability_ptz_c<0~(
n-1)>_maxtilt
1/4 Custom home tilt position.
axisz capability_ptz_c<0~(
n-1)>_minzoom ~
capability_ptz_c<0~(
n-1)>_maxzoom
1/4 Custom home zoom position.
axisf capability_ptz_c<0~(
n-1)>_minfocus ~
capability_ptz_c<0~(
n-1)>_maxfocus
1/4 Custom home focus position.
axisflip <boolean> 1/4 Custom home flip side.
returnhome <boolean> 1/4 Enable/disable return home while
idle.
returnhomeinterval 1~999 1/4 While idle over this time interval,
idle action will be taken.
digitalzoom <boolean> 1/4 Enable/disable digital zoom
idleaction_enable <boolean> 1/4 Enable/disable idle action while
idle
idleaction_type pan,patrol,tour,home
,objtrack,prev
1/4 This field tells what kind of action
should be taken while idle.
idleaction_interval 1~999 1/4 While idle over this time interval,
idle action will be taken.
zoomenhance <boolean> 1/4 Enable /disable zoom
enhancement
tour_index -1, 0~19 1/4 Index of the enabled tour group,
from 0 to 19.