Vivotek IB9387-HT-A User Manual

VIVOTEK
User's Manual - 417
© 2019 VIVOTEK INC. All Right Reserved
280
"washer_mode : OK\r\n"
"washer_status : FAIL\r\n"
PARAMETER
VALUE
DESCRIPTION
channel
0~"capability_nvideoin"-1
Channel of the video source.
washer_mode
wiper
Apply the wiper to the mode of washer
control system.
washer
Apply the washer to the mode of washer
control system.
washer_status
on
Enable the functionality of washer control
system.
off
Disable the functionality of washer control
system.
washer_dwelltime
15~999
Apply washer washer control system
operation time (including the time when
spraying and wiper actions take place).
heater_status
auto
automatic control the heater component to
keep the device in a workable environment.
trigger
heater component is work in force heater
once.
Syntax: (for query API)
http://<servername>/cgi-bin/admin/peripheral.cgi?channel=<value>&operation=get
[&supportdevice] –Get support peripheral device
[&washer_supportmode] – Get washer support modes
[&washer_mode] – Get washer mode
[&washer_status] – Get washer status
[&washer_dwelltime] – Get washer clean time
[&heater_supportstatus] – Get heater support control status
[&heater_status] – Get heater status
Example:
http://myserver/cgi-bin/admin/peripheral.cgi?channel=0&operation=get&supportdevice&washer_
status
Response:
HTTP/1.0 200 OK\r\n
Cache-control: no-cache\r\n
© 2019 VIVOTEK INC. All Right Reserved
281
Pragma: no-cache\r\n
\r\n
supportdevice=washer,heater\r\n
washer_status=off\r\n
PARAMETER VALUE DESCRIPTION
channel 0~"capability_nvideoin"-1 Channel of the video source.
supportdevice N/A Get support peripheral device.
washer_supportmode N/A Get the support mode of washer control system.
washer_mode N/A Get the current mode of washer control system.
It return the value of "washer_mode"
washer_status N/A Get the current
status of washer control module.
The status is 'off' as default, which means the
washer is stopped; and the status 'on' means the
washer is running.
washer_dwelltime N/A Get the current washer clean period of washer
control system.
heater_supportstatus N/A Get the support status of heater control system.
heater_status N/A Get the current heater status.
Normally it will be 'auto', it means the heater
device is control by internal algorithm to keep in
a suitable environment; Otherwise is 'trigger', it
means the heater device is force enable to heat
to an internal condition.‘trigger’ status will be
transfer to ‘auto’ after reach the internal
condition.

Vivotek IB9387-HT-A Specifications

General

Brand	Vivotek
Model	IB9387-HT-A
Category	Security Camera
Language	English