Need help?Do you have a question about the Vivotek IB8369A and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| PTZ control | Yes |
| Certification | CE, LVD, FCC Class A, VCCI, C-Tick |
| Placement supported | Outdoor |
| Connectivity technology | Wired |
| Wi-Fi | No |
| Number of users | 10 user(s) |
| Supported network protocols | IPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS, DDNS, PPPoE, CoS, QoS, SNMP, 802.1X, UDP, ICMP, ARP, SSL, TLS |
| Ethernet LAN (RJ-45) ports | 1 |
| Form factor | Bullet |
| Mounting type | Wall |
| Product color | White |
| Protection features | Vandal proof |
| Total megapixels | 2 MP |
| Maximum resolution | 1920 x 1080 pixels |
| Video formats supported | H.264, M-JPEG |
| Image quality adjustment | Brightness, Contrast, Saturation, Sharpness |
| Power source type | PoE |
| Camera shutter speed | 1/5 - 1/32000 s |
| Minimum illumination | 0.01 lx |
| Storage temperature (T-T) | -10 - 50 °C |
| Operating temperature (T-T) | -20 - 50 °C |
| Sensor type | CMOS |
| Optical sensor size | 1/2.9 \ |
| Digital zoom | 48 x |
| Focal length range | 0 - 3.6 mm |
| Bundled software | Wizard 2, VAST 32-CH Software |
| Flash memory | 128 MB |
| Internal memory | 256 MB |
| Compatible memory cards | MicroSD (TransFlash), MicroSDHC, MicroSDXC |
| LED type | IR |
Weight and Dimensions| Length | 300 mm |
|---|---|
| Weight | 1010 g |
| Diameter | 72 mm |
Explains network connection using Power over Ethernet (PoE).
Covers connecting the camera via router, static IP, and PPPoE.
Details accessing the camera via web browsers, RTSP players, mobile devices, and software.
Configuration of basic camera settings like host name and LED indicators.
Instructions for customizing the homepage layout, including background, font, and logo.
Explains how to restore factory defaults and upgrade the camera firmware.
Feature to restore the network camera to factory default settings, with options to retain certain configurations.
Basic image settings for video title, timestamp, color, and power line frequency.
Configuration for automatic switching to B/W mode and IR illuminator in night mode.
Manages the IR cut filter for automatic removal in low light conditions.
Adjusts white balance for optimal color temperature, with automatic and manual options.
Controls image properties such as brightness, contrast, saturation, sharpness, and gamma curve.
Allows setting measurement windows for low light compensation, including full view and custom regions.
Manually sets exposure level, shutter time, and gain control values for optimal imaging.
Defines stream modes and parameters for video output.
Reduces bandwidth consumption by adjusting quality for foreground and background areas, with Auto tracking and Manual modes.
Manages bandwidth utilization by selecting bit rates and defining policies for constrained or fixed quality.
Sets the network connection type to LAN or PPPoE.
Configures LAN settings, including automatic or fixed IP addresses.
Sets up HTTP streaming, authentication, and port configurations.
Guides on setting up RTSP streaming, including authentication and access names for different streams.
Instructions for setting the administrator 'root' password for initial security setup.
Details on creating, modifying, and deleting user accounts with specific access rights.
Steps for creating and installing a certificate for secure HTTPS connections.
Enables and configures access list filtering based on IP addresses (Allow/Deny type).
Details the e-PTZ control settings for digital pan, tilt, and zoom operations.
Explains how to configure reactive measures like recording or snapshots when a trigger is activated.
Defines the cause or stimulus for triggering the camera, such as motion detection or digital input.
Defines the actions performed by the camera when a trigger is activated, such as digital output or backup.
Enables and configures various tampering conditions such as image too dark, bright, or blurry.
Defines adaptive recording, recording source, schedule, and capacity for video recording.
Selects the trigger source for recording, such as motion detection, DI detection, or schedule.
To Next Page
