Need help?Do you have a question about the Vivotek VS8100 and is the answer not in the manual?
General| Maximum frame rate | 30 fps |
|---|---|
| Maximum video resolution | 720 x 480 pixels |
| Video compression formats | H.264, M-JPEG |
| PTZ control | Yes |
| Flash memory | 16 MB |
| Image settings | Brightness, Contrast, Mirroring, Privacy mask |
| Internal memory | 128 MB |
| Compatible operating systems | Microsoft Windows XP/Vista/7/2000 |
| Certification | CE C-Tick FCC ( Class A ) LVD VCCI |
| Product color | Black |
| LED indicators | Power, Status |
| Connector(s) | RJ-45, BNC, RS-485, 3.5mm Phone Jack |
| Supported network protocols | IPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS, DDNS, PPPoE, CoS, QoS, SNMP, 802.1X |
| Copper ethernet cabling technology | 10BASE-T, 100BASE-TX |
| BNC input ports | 1 |
| I/O terminal ports | - |
| Power consumption (typical) | 5 W |
| Operating temperature (T-T) | 0 - 50 °C |
Weight and Dimensions| Weight | 64 g |
|---|---|
| Dimensions (WxDxH) | 34 x 65 x 25 mm |
Essential safety and legal precautions before operating the video server.
Identifies the physical ports and components of the VS8100 video server.
Step-by-step instructions for connecting the video server to analog cameras and network.
Explains the meaning of different LED status lights for system monitoring.
Details how to perform a hardware reset to restore factory default settings.
Guides on setting up the video server for internet access via router or static IP.
Instructions for downloading and installing VIVOTEK's Installation Wizard 2 utility.
Steps to verify the video server is ready for live viewing and recording software installation.
How to access the video server's interface using web browsers and install necessary plugins.
Instructions for viewing live streams using RTSP-compatible media players.
Steps for viewing live video streams on 3GPP-compatible mobile devices.
Guidance on using VIVOTEK's recording software for monitoring and recording.
Explains the different sections of the main interface page, including logo, controls, and video window.
Details the PTZ navigation panel for camera movement and control.
Details settings for hostname, system time, and LED indicators.
Options for customizing the homepage layout, including logo and button display.
How to configure the network camera to send system logs to a remote server for backup.
Procedures for firmware upgrades and rebooting the network camera.
Adjustments for video title, color, orientation, brightness, contrast, and sharpness.
Configuration for multiple video streams, including frame size, codec, and quality.
Options for audio mute, input gain, and codec type selection for audio transmission.
Configuration of network type (LAN, PPPoE) and IP address settings.
Details on HTTP and RTSP streaming, including authentication and port settings.
Configuration for dynamic domain name services like Express Link and manual DDNS setup.
Explanation of QoS, CoS, and DSCP models for network traffic prioritization.
Configuration for Simple Network Management Protocol (SNMP) v1, v2c, and v3.
Enabling password protection and creating/managing user accounts with different privileges.
Steps for creating and installing SSL certificates to enable secure HTTPS communication.
Controls client access by verifying PC IP addresses and configuring allow/deny lists.
Enables port-based network access control using IEEE 802.1x authentication.
How to configure Pan/Tilt/Zoom operation via RS485 interface.
Setting and managing preset camera positions for PTZ control and patrol.
Configuring the camera to patrol through selected preset positions with a set schedule.
Defining custom command buttons for PTZ control when using specific drivers.
Setting up events based on triggers like motion detection or manual input, and defining actions.
Configuring motion detection windows, sensitivity, and percentage thresholds.
Enabling camera tamper detection to identify redirection, blocking, or defocusing incidents.
Defining adaptive recording, source, schedule, and capacity for video recording.
Specifies external HTTP-based API for integrating with web applications and controlling camera functions.
Detailed hardware and software specifications for the VS8100 video server.
To Next Page
