Dry cleaning Top Pro & Extra I-Tap with
Iodophore USA Only or Huwa-San Canada Only
• During the entire cleaning process, it must be ensured that no drinking water is drawn o. If the
housing is open, the device must be protected against access. Caution! Danger to life in the event of
electric shock by touching live parts!
• Use appropriate safety gloves according to EN 374, safety glasses with side protection and suitable
work clothes.
• Attach the Do not Use sign.
• The device can not be operated with the Easy Access Panel in the cleaning program.
Step 1— Preparations
Step 2 — Start of the integrated cleaning program
• Open case; remove the right housing cover
• Start the cleaning program via the service menu. The following steps in these instructions contain
additional information or point out important points in the cleaning program.
• Enter the Admin mode on the front screen by entering the Service PIN: 0112
• Follow the instructions on the screen
To Next Page
Loading...