3
16
CHANGING THE SCREEN ASPECT RATIO
The TV can display images in four dierent modes: Normal, Panoramic,
Wide, and Zoom. Each mode displays the picture dierently.
Some programs have black bars on the top or sides of the picture so
that the picture keeps its original shape. Examples include wide-screen
movies and older television programs.
To change the screen aspect ratio:
1. Press the Wide button on the remote.
2. Use the Arrow buttons to highlight the aspect ratio you wish to
view and press OK.
• Normal preserves the content’s original aspect ratio and size.
• Stretch expands a widescreen image to ll the screen from
top to bottom and stretches it half as much from right to left.
Figures appear tall and thin.
• Wide stretches a 4:3 aspect ratio picture to the edges of the
screen. Since the picture is being stretched, the display image
may appear distorted—gures appear short and fat. If the
program is already formatted for widescreen viewing (1.85:1
or 2.35:1), then black bars will appear on the top and bottom
of the display image.
• Zoom expands images evenly in all directions (33% taller and
33% wider) with black bars to t the screen. A 720p image will
ll a 1080p screen.
Note: Aspect ratio settings may vary by Input source.
Normal
Stretch Wide Zoom
Update stretch
Normal
Stretch
Wide
Zoom
To Next Page
Loading...
Need help?
General
