3
25
8. Type your E-mail Address,
First Name, Last Name, Phone
Number, and ZIP Code using the
on-screen keyboard.
Highlight Next and press OK.
9. Use the Arrow buttons on the
remote to highlight your TV
source and press OK.
If you have cable TV, select
whether you have a cable box or
if you connect the TV directly to
a cable from the wall.
10. If the TV Signal screen appears,
the TV will need to scan for
channels, which takes several
minutes. Use the arrow buttons
on the remote to highlight Begin
Scan and press OK.
11. Use the Arrow and OK buttons
on the remote to select the input
your TV source is connected to.
The First-Time Setup is complete.
To Next Page
Loading...
Need help?
General
