Vizio D320-B1 Quick Start Guide

HELP TOPICS
How do I return to the
Setup App?
There is a picture, but
there is no sound.
The TV displays
“No Signal.”
There are black/
gray bars on the top/
bottom/sides of the
screen.
There is no power.
• The on-screen menu has guided setup. Press MENU > Guided Setup. Select
the type of setup you need and press OK. The Setup App begins.
• To reset the TV to factory defaults, press MENU > System > Reset & Admin >
Reset TV to Factory Defaults. If you set a Parental Control Passcode, enter it
now. Select Reset. Remember that all of your settings will be lost.
• Press the VOLUME UP button on the remote.
• Press the MUTE button on the remote to ensure that mute is off.
• Press MENU > Audio. Be sure TV Speakers is set to On.
• Be sure your connected devices are turned on.
• Press the INPUT button on the remote and select the input to which your
device is connected (TV, HDMI-1, COMP, etc.).
• Note that some television channels add black bars to the picture.
• Set the TV image mode so that the picture fills the screen. Press the WIDE but-
ton on the remote until the screen is filled, and then press OK.
• Adjust the video settings of your external device.
• Be sure the power cord is securely connected to the AC socket on the TV and to
a working electrical outlet.
• Press the POWER button on the remote or on the side of the TV.
• If the above steps do not work, try plugging the power cord into a different outlet.

Vizio D320-B1 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	32 \
Display brightness	- cd/m²
Display resolution	1366 x 768 pixels
Native aspect ratio	16:9
Native refresh rate	60 Hz
LED backlighting type	Full-Array
Contrast ratio (dynamic)	200000:1
Motion interpolation technology	-
3D	No
Annual energy consumption	61 kWh
Power consumption (average)	32 W
Audio decoders	DTS TruVolume, DTS Studio Sound
RMS rated power	10 W
Number of speakers	2
DVI-D ports quantity	0
USB 2.0 ports quantity	1
Remote control type	XRT020
Product color	Black
Panel mounting interface	100 x 100 mm
Number of OSD languages	3
On Screen Display (OSD) languages	ENG, ESP, FRE
Package depth	141 mm
Package width	795 mm
Package height	515.8 mm
Package weight	7901.5 g
Sustainability certificates	ENERGY STAR
Power consumption (standby)	1 W

Weight and Dimensions

Depth (with stand)	174.5 mm
Width (with stand)	733.5 mm
Height (with stand)	486.6 mm
Weight (with stand)	5801.4 g
Depth (without stand)	66.5 mm
Height (without stand)	444.5 mm
Weight (without stand)	5502 g