Vizio D55-D2 User Manual

3
If the TV Signal channel scan screen appears, the
TV will need to scan for channels, which takes
several minutes.
Use the arrow buttons on the remote to highlight
Begin Scan and press OK.
10
Otherwise, use the Arrow and OK buttons on
the remote to select the input your TV source
is connected to.
:KHQ\RXDUHȴQLVKHGWKHPHVVDJH
“Setup is complete.” will appear.
The First-Time Setup is complete.
Use the Arrow buttons on the remote to highlight
your TV source and press OK.
9
If you have cable TV, select whether you have
a cable box or if you connect the TV directly
to a cable from the wall.
Note: Number of ports may differ by TV.
21

Vizio D55-D2 Specifications

General

Display diagonal	55 \
Display technology	LED
Native aspect ratio	16:9
Native refresh rate	120 Hz
LED backlighting type	Full-Array
Contrast ratio (dynamic)	5000000:1
Display number of colors	16.78 million colors
Ambient light sensor	Yes
Number of OSD languages	3
On Screen Display (OSD) languages	ENG, ESP, FRE
3D	No
RMS rated power	30 W
Number of speakers	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	1
Remote control type	XRT122
Sustainability certificates	ENERGY STAR
Power consumption (standby)	1 W
Power consumption (typical)	40.32 W
Panel mounting interface	200 x 200 mm
Package depth	160.02 mm
Package width	1465.07 mm
Package height	829.06 mm
Package weight	19500 g

Weight and Dimensions

Depth (with stand)	249.94 mm
Width (with stand)	1240.03 mm
Height (with stand)	782.57 mm
Weight (with stand)	14200 g
Depth (without stand)	68.07 mm
Height (without stand)	722.63 mm
Weight (without stand)	13800 g