4
Completing the First-Time Setup
20
8. Use the Arrow buttons on the
remote to highlight your TV
source and press OK.
If you have cable TV, select
whether you have a cable box
or if you connect the TV directly
to a cable from the wall.
9. If the TV Signal screen appears,
the TV will need to scan for
channels, which takes several
minutes. Use the arrow buttons
on the remote to highlight
Begin Scan and press OK.
10. Use the Arrow and OK buttons
on the remote to select
the input your TV source is
connected to.
The First-Time Setup is complete.
To Next Page
Loading...
Need help?
General
