Need help?Do you have a question about the Vizio E401i-A2 and is the answer not in the manual?
General| Screen shape | Flat |
|---|---|
| Response time | 8 ms |
| Display diagonal | 40 \ |
| Display brightness | - cd/m² |
| Native refresh rate | 120 Hz |
| LED backlighting type | Razor LED |
| Supported video modes | 1080p |
| Contrast ratio (dynamic) | 200000:1 |
| Display diagonal (metric) | 101.6 cm |
| 3D | No |
| Tuner type | - |
| Audio system | SRS TruSurround HD, SRS StudioSound, SRS TruVolume |
| Audio decoders | Dolby Digital, Dolby Digital Plus |
| RMS rated power | 20 W |
| Number of speakers | 2 |
| HDMI ports quantity | 3 |
| DVI-D ports quantity | 0 |
| USB 2.0 ports quantity | 1 |
| Wi-Fi standards | Wi-Fi 4 (802.11n) |
| Product color | Black |
| Panel mounting interface | 200 x 200 mm |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 53.35 W |
| Package depth | 142 mm |
| Package width | 1017 mm |
| Package height | 653 mm |
| Package weight | 15800 g |
| Sustainability certificates | ENERGY STAR |
Weight and Dimensions| Depth (with stand) | 205.7 mm |
|---|---|
| Height (with stand) | 594.6 mm |
| Weight (with stand) | 13900 g |
| Depth (without stand) | 49.53 mm |
| Width (without stand) | 921.3 mm |
| Height (without stand) | 553 mm |
| Weight (without stand) | 12100 g |
Verifies that all package contents are present and undamaged.
Instructions for attaching the TV to its included stand.
Guidance on wall-mounting the TV using a VESA bracket.
Information on how to register your VIZIO product for support and updates.
Details on purchasing extended warranty service plans for additional coverage.
Crucial guidelines to prevent injury, electric shock, and fire hazards during TV use.
Recommendations for protecting the TV during lightning storms or extended absence.
Warnings about locating antennas near power lines and grounding coaxial cables.
Identifies and explains the various input/output ports on the TV's rear.
Describes the physical buttons and their functions on the side of the TV.
Details the front panel components, including the remote sensor.
Explains the purpose and operation of each button on the remote control.
Guides on connecting external video sources like DVD players or game consoles.
Instructions for connecting external audio systems like sound bars or receivers.
Steps for connecting the TV to a home network using an Ethernet cable.
Guide to connecting the TV to a wireless network via Wi-Fi.
Explains how to use the remote to navigate and select menu options.
How to select the active video input from connected devices.
Adjusts the image display mode (e.g., Wide, Zoom, Normal).
Customizes the look of digital closed captions (text size, color, opacity).
Sets a timer to automatically turn the TV off after a specified period.
Configures the TV to turn off automatically when no signal is detected.
Overview of how to modify basic picture parameters like brightness and contrast.
Controls the horizontal and vertical size and position of the displayed image.
Restores picture settings to their factory default values.
Configures digital and analog audio output properties for external systems.
Restores all audio settings to their factory default configuration.
Step-by-step guide to connect the TV to a Wi-Fi network.
Manually configure IP address, subnet mask, and DNS settings.
Verifies the TV's network connectivity and performance.
Selects the active video input source for the TV.
Configures the TV tuner for antenna or cable input.
Searches for available broadcast channels for viewing.
Guides on adding single channels or ranges via partial search.
Removes unwanted channels from the channel list.
Selects the preferred audio language for broadcast programs.
Steps to enter the parental controls settings.
Activates rating-based content filtering.
How to prevent access to specific TV channels.
Filters content based on its rating category (e.g., TV, Movie).
Updates the passcode to secure parental control settings.
Resets all parental control locks to factory defaults.
Renames input labels (e.g., "HDMI 1" to "DVD Player") for easier identification.
Selects the display language for the TV's menus.
Configures the TV's time zone for accurate time display.
Controls HDMI-connected devices using the TV remote.
Controls the visibility of the TV's power indicator light.
Accesses the user manual, system info, and setup guides.
Shows a summary of the TV's current settings and configuration.
Reverts picture and audio settings to their defaults.
Resets all TV settings to their original factory configuration.
Steps to connect a USB drive to the TV's USB port.
How to select and play music, video, or photo files from USB.
Explains the functions of the colored buttons on the remote for VIA.
Navigates and launches applications available on the VIA Dock.
Personalizes the VIA Dock by rearranging application icons.
Installs new applications from the Connected TV Store.
Deletes applications from the VIA Dock.
Sets a PIN to restrict access to administrative controls.
Deletes an existing user profile from the TV.
Resets the VIA Dock and installed widgets to their original settings.
Steps to resolve the "No Signal" display error.
Solutions for the TV not turning on.
Steps to fix issues where the TV is on but shows no picture.
Solutions for when the TV produces no audio output.
Addresses problems with incorrect colors or unresponsive remote control.
Tips for improving image quality and resolving static or noise.
Solutions for distorted images or when the display doesn't fill the screen.
Explains why volume and image size may differ between input sources.
Details terms and conditions for using VIZIO Internet Applications and services.
Governs the use of software installed on the VIZIO TV.
To Next Page
