Vizio E50-C1 User Manual

4
56
To begin device discovery:
• From the CEC menu, highlight Device Discovery and press
OK.
Your TV begins looking for CEC devices connected to all of its
HDMI inputs. When discovery is complete:
• The CEC-compatible devices are listed below Device
Discovery.
• The names of these devices now appear on the Input
menu.
• If an audio device was discovered, the TV's speakers are
WXUQHGR΍
• The VIZIO TV remote controls an attached VIZIO sound
bar or other audio system.
7XUQLQJWKH3RZHUΖQGLFDWRU2QRU2΍
The Power Indicator on the front of your TV normally does not glow
when the TV is on. You can change this setting if you prefer the light
to be on.
7RWXUQWKH3RZHUΖQGLFDWRU/LJKWRQRUR΍
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight System and
press OK. The SYSTEM menu is displayed.
3. Highlight Power Indicator and press OK.
4. Use the Up/Down Arrow buttons to select On or 2΍, then
press OK.

Vizio E50-C1 Specifications

General

Screen Type	led
Wall Mount	200mm x 200mm
Tuner	digital
Screen Size	49.5 inches, 50 inches
Refresh Rate	120hz
HDR	no
Number Of Speakers	2
USB Ports	1
RF Antenna	yes
Network	built-in wi-fi
Headphones Output	no
Digital Optical Audio Outputs	1
Analog Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	1
DVI	0
SmartTV	vizio internet apps (v.i.a.)
Remote Control	smart
3D	no
Power Consumption	111 kilowatt hours
Depth with Stand	10.04 inches
Height with Stand	28.27 inches
Width with Stand	44.24 inches
Net Weight with Stand	28.44 pounds
Depth without Stand	2.52 inches
Height without Stand	25.91 inches
Net Weight without Stand	27.56 pounds