1
4
1. It is recommended that two people take part in the base
installation.
Remove any plastic wrapping from the TV and the stand.
Place the TV screen-down on a clean, flat surface. To prevent
scratches or damage to the screen, place the TV on a soft
surface such as a blanket.
2. Align the base with the TV and the tighten the three(3)
included Phillips screws into the base with a Phillips
screwdriver.*
*Not included
3. Move the TV with attached stand into an upright position
and place on a flat, level, and stable surface.
To ensure proper ventilation, leave at least 1” of space
between the back of the TV and any other object
(walls, etc).
To install the base:
To Next Page
Loading...
Need help?
General
