Vizio E70-F3 User Manual

3
Adjusting More Picture Settings
To adjust more picture settings:
1. From the PICTURE menu, use the
Arrow buttons to highlight More
Picture, and then press OK.
2. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press the Left/
Right Arrow buttons to change
the setting:
• Color Temperature -
See
Adjusting the Color
Temperature.
• Black Detail - Adjusts the
average brightness of the
picture to compensate for
large areas of brightness.
Select O, Low, Medium, or
High.
• Xtreme Black Engine™ - Based on the content, dynamically
adjusts and balances the brightness and the contrast ratio
of the picture by locally adjusting backlight zones.
• Clear Action - Reduces blur in scenes with fast action but
limtis the range for the Backlight setting.
• Reduce Noise
- Reduce Signal Noise - Diminishes artifacts in the
image caused by the digitizing of image motion content.
Select O, Low, Medium, or High.
- Reduce Block Noise - Reduces pixelation and
distortion for mpeg les. Select O, Low, Medium, or High.
• Game Low Latency - Select On to reduce video delay (lag)
when gaming.
• Film Mode - Optimizes the picture for watching lm. Select
Auto or O.
• Color Space - Select Color Space for the source. Video
sources uses YCbCr, but PC uses RGB.
• Gamma - Set the shape of the Gamma curve. Use lower
Gamma values for bright room conditions, and higher
values when it’s dark.
3. When you have nished adjusting More Picture Settings, press the
Exit button on the remote.
Adjusting the Color Temperature
Adjusting the color temperature changes the white balance of the
picture.
To adjust the color temperature:
1. From the MORE PICTURE menu,
use the Arrow buttons to
highlight Color Temperature,
and then press OK.
2. Use the Arrow buttons on the
remote to highlight a color
temperature preset and then
press OK.
• Normal is optimized for
television viewing.
• Cool produces a blue-hued
picture.
• Computer optimizes the
picture for use as a
PC monitor.
3. When you have nished adjusting the color temperature,
press the Exit button on the remote.
More Picture
Color Temperature Normal
Black Detail Off
Extreme Black Engine™ Low
Clear Action Off
Reduce Noise
Game Low Latency Off
Film Mode On
Color Space Auto
Gamma 2.2
Back
Color Temperature
Normal
Cool
Computer
Back
15

Vizio E70-F3 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	70 \
Display brightness	- cd/m²
Display technology	LED
Native aspect ratio	16:9
Native refresh rate	120 Hz
LED backlighting type	Full-Array
Contrast ratio (dynamic)	5000000:1
Display number of colors	1.073 billion colors
Display diagonal (metric)	176.53 cm
Motion interpolation technology	-
Processor cores	8
Ambient light sensor	Yes
Video compression formats	H.265, HEVC, VP9
PC in (D-Sub)	No
HDMI ports quantity	4
DVI-D ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
AC input voltage	120 V
Power consumption (standby)	0.5 W
Power consumption (typical)	96 W
Package depth	199.9 mm
Package width	1665 mm
Package height	1021.1 mm
Package weight	35550 g
Remote control type	XRT136
Battery type	AAA
Number of batteries supported	2
Operating system installed	SmartCast OS
Number of OSD languages	3
On Screen Display (OSD) languages	ENG, ESP, FRE
RMS rated power	20 W
Wi-Fi standards	Wi-Fi 5 (802.11ac)
Sustainability certificates	ENERGY STAR
Certification	ES 7.0 UL, cUL, FCC B, BETS-7/ICES-003 B, IC
Product color	Black
Panel mounting interface	400 x 400 mm

Weight and Dimensions

Depth (with stand)	281.9 mm
Width (with stand)	1569.7 mm
Height (with stand)	977.9 mm
Weight (with stand)	25600 g
Depth (without stand)	73.7 mm
Height (without stand)	904.2 mm
Weight (without stand)	25200 g