Vizio E70-F3 User Manual

A
I see “noise” or static on the screen.
• When your TV’s digital capabilities exceed a digital
broadcast signal, the signal is up-converted (improved) to
match your TV’s display capabilities. This up-converting
can sometimes cause irregularities in the image.
• If you are using an antenna, the signal strength of the
channel may be low. Ensure your antenna is connected
securely to the TV and move the antenna around the
room or close to a window for the best signal.
When I change input source, the display image changes size.
• The TV remembers the viewing mode on each input
source. If the viewing mode on the new input source
diers from the one on the input source you switch from,
the dierence may be noticeable.
• See
Changing the Screen Aspect Ratio.
How do I download the VIZIO SmartCast™ App?
• Make sure your phone or tablet is connected to a Wi-Fi
network. Open a browser on your phone or tablet.
Navigate to vizio.com/smartcastapp and follow the
on-screen instructions to download the VIZIO SmartCast™
App.
How do I change the Inputs?
• Make sure the VIZIO SmartCast™ App is installed on your
phone or tablet. Open the VIZIO SmartCast™ App. Tap on
the Device list and select your TV. Tap on the Input key
and select the Input of your choice.
• Press the Input button on the back of the Display to cycle
through the Inputs.
• Press the Input button on the basic remote to cycle
through the Inputs.
How do I connect to my Wi-Fi network?
• On your IR remote, press the Menu button then go to
Networkà Select your Wi-Fi nameà Enter password.
• Open the VIZIO SmartCast™ App on your phone or tablet.
Tap on the device list and select your Display. Tap on the
Settings iconà Network à Wireless Access Points.
Select your Wi-Fi network from the list, enter the Wi-Fi
password, and tap Connect.
How do I watch Cable/Antenna TV channels?
• If you subscribe to cable or satellite, simply connect an
HDMI cable (not included) to the receiver.
• If you use external antennas to watch local broadcast
channels, a TV tuner is required and is sold separately by
third parties.
How do I stream apps like Netix and Youtube to my VIZIO
SmartCast™ Display?
• Download and open a Chromecast-enabled apps on your
mobile device, such as like Netix or Youtube. Then tap
the Cast button.
How do I exit Demo Mode
• Press and hold the Input button on the back of the
Display to exit the demo mode.
45

Vizio E70-F3 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	70 \
Display brightness	- cd/m²
Display technology	LED
Native aspect ratio	16:9
Native refresh rate	120 Hz
LED backlighting type	Full-Array
Contrast ratio (dynamic)	5000000:1
Display number of colors	1.073 billion colors
Display diagonal (metric)	176.53 cm
Motion interpolation technology	-
Processor cores	8
Ambient light sensor	Yes
Video compression formats	H.265, HEVC, VP9
PC in (D-Sub)	No
HDMI ports quantity	4
DVI-D ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
AC input voltage	120 V
Power consumption (standby)	0.5 W
Power consumption (typical)	96 W
Package depth	199.9 mm
Package width	1665 mm
Package height	1021.1 mm
Package weight	35550 g
Remote control type	XRT136
Battery type	AAA
Number of batteries supported	2
Operating system installed	SmartCast OS
Number of OSD languages	3
On Screen Display (OSD) languages	ENG, ESP, FRE
RMS rated power	20 W
Wi-Fi standards	Wi-Fi 5 (802.11ac)
Sustainability certificates	ENERGY STAR
Certification	ES 7.0 UL, cUL, FCC B, BETS-7/ICES-003 B, IC
Product color	Black
Panel mounting interface	400 x 400 mm

Weight and Dimensions

Depth (with stand)	281.9 mm
Width (with stand)	1569.7 mm
Height (with stand)	977.9 mm
Weight (with stand)	25600 g
Depth (without stand)	73.7 mm
Height (without stand)	904.2 mm
Weight (without stand)	25200 g