Vizio E75-E3 Quick Start Guide

English - 14
Selecting Quick Start Mode and Calibrated
Picture Mode
Please note that by customizing the picture
settings on this Display, the energy consumption
required to operate this Display will change
Your Display is set to Eco Mode by default. When the
Display is powered o, Eco Mode setting uses less than
0.5W of power. Please note that by changing this setting
the energy consumption required to operate this device
will change.
Quick Start Mode enables your Display to power on
faster as well as automatically power on when casting
content.
When you rst setup a VIZIO SmartCast
™
device,
the VIZIO SmartCast
™
App will prompt you to switch
to Quick Start Mode. If you chose not to, you can
change this setting anytime by tapping on the icons
Settings à System à Power Mode à Quick Start.
Calibrated Picture Mode allows your Display to deliver
the most accurate picture quality for most environments.
Please note that by customizing the picture settings
on this Display, the energy consumption required to
operate this Display will change.
When you rst setup a VIZIO SmartCast
™
device, the
VIZIO SmartCast
™
App will prompt you to switch to
Calibrated Picture Mode. If you chose not to, you can
change this setting anytime by tapping on the icons
Settings à Picture à Picture Mode à Calibrated

Vizio E75-E3 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	75 \
Display brightness	- cd/m²
Display technology	LED
Native aspect ratio	16:9
Native refresh rate	120 Hz
LED backlighting type	Full-Array
Contrast ratio (dynamic)	5000000:1
Viewing angle, horizontal	176 °
Motion interpolation technology	Clear Action
3D	-
Battery type	AAA
Number of batteries supported	2
Dimming type	Active LED Zones® x14
Processor cores	8
High Dynamic Range (HDR) technology	High Dynamic Range (HDR) 1000
Wi-Fi standards	Wi-Fi 5 (802.11ac)
Bluetooth version	4.1
HDMI ports quantity	4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Audio decoders	DTS, DTS Studio Sound, DTS TruSurround, DTS TruVolume
RMS rated power	10 W
Power consumption (standby)	0.5 W
Power consumption (typical)	210 W
Number of OSD languages	3
On Screen Display (OSD) languages	ENG, ESP, FRE
Panel mounting interface	400 x 400 mm
Remote control type	XRT135
Package type	Box
Package depth	180 mm
Package width	1800 mm
Package height	1070 mm
Package weight	39100 g

Weight and Dimensions

Depth (with stand)	381 mm
Height (with stand)	1020 mm
Weight (with stand)	28600 g
Depth (without stand)	51 mm
Width (without stand)	1680 mm
Height (without stand)	970 mm
Weight (without stand)	28150 g