Vizio E75-E3 Quick Start Guide

English - 26
Top Tips
Question: How do I watch Cable/Antenna TV channels?
• If you subscribe to cable or satellite, simply connect an HDMI cable (not included) to the receiver.
• If you use external antennas to watch local broadcast channels, a TV tuner is required and is sold separately by third parties.
How do I connect to my Wi-Fi network?
• On your IR remote, press the Menu button then go to Networkà Select your Wi-Fi nameà Enter password
• Press the Setup / Link button twice on the basic remote. Open the VIZIO SmartCast
™
App on your phone or tablet. Tap on the Device list and
select Setup a New Device and follow the on-screen instructions.
• Open the VIZIO SmartCast
™
App on your phone or tablet. Tap on the device list and select your Display. Tap on the Settings iconà
NetworkàWireless Access Points. Select your Wi-Fi network from the list, enter the Wi-Fi password, and tap Connect.
• Press the Setup / Link button twice on the basic remote. Press Play / Pause button to enter manual setup. Follow the on-screen instructions to
complete setup and connect to a wireless network.
Question: How do I change inputs?
• Make sure the VIZIO SmartCast
™
App is installed on your phone or tablet. Open the VIZIO SmartCast
™
App. Tap on the Device list and select your
Display. Tap on the Input list and select the input of your choice.
• Press the INPUT button on the back of the Display to cycle through the inputs.
• Press the INPUT button on the basic remote to cycle through the inputs.
How do I download the VIZIO SmartCast
™
App?
• Make sure your phone or tablet is connected to a Wi-Fi network. Open a browser on your phone or tablet. Navigate to vizio.com/smartcastapp
and follow the on-screen instructions to download the VIZIO SmartCast
™
App.
How do I exit Demo Mode?
• Press and hold the INPUT button on the back of the Display to exit the demo mode.
How do I adjust the Display picture and audio settings?
• Open the VIZIO SmartCast
™
App on your phone or tablet. Tap on the device list and select your Display. Tap on Settings iconà Picture or
Audio. The various picture and audio settings are displayed.
• On your IR remote, press the Menu button then go to Audio or Picture à Select the settings you'd like to adjust.
How do I stream apps like Netix and Youtube to my VIZIO SmartCast
™
Display?
• Download and open a Chromecast-enabled apps on your mobile device, such as like Netix or Youtube. Then tap the Cast button. See page 18
for more details on how to cast.

Vizio E75-E3 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	75 \
Display brightness	- cd/m²
Display technology	LED
Native aspect ratio	16:9
Native refresh rate	120 Hz
LED backlighting type	Full-Array
Contrast ratio (dynamic)	5000000:1
Viewing angle, horizontal	176 °
Motion interpolation technology	Clear Action
3D	-
Battery type	AAA
Number of batteries supported	2
Dimming type	Active LED Zones® x14
Processor cores	8
High Dynamic Range (HDR) technology	High Dynamic Range (HDR) 1000
Wi-Fi standards	Wi-Fi 5 (802.11ac)
Bluetooth version	4.1
HDMI ports quantity	4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Audio decoders	DTS, DTS Studio Sound, DTS TruSurround, DTS TruVolume
RMS rated power	10 W
Power consumption (standby)	0.5 W
Power consumption (typical)	210 W
Number of OSD languages	3
On Screen Display (OSD) languages	ENG, ESP, FRE
Panel mounting interface	400 x 400 mm
Remote control type	XRT135
Package type	Box
Package depth	180 mm
Package width	1800 mm
Package height	1070 mm
Package weight	39100 g

Weight and Dimensions

Depth (with stand)	381 mm
Height (with stand)	1020 mm
Weight (with stand)	28600 g
Depth (without stand)	51 mm
Width (without stand)	1680 mm
Height (without stand)	970 mm
Weight (without stand)	28150 g