VIZIO M320NV or M370NV User Manual
10
www.VIZIO.com
Chapter 1 Setting Up Your HDTV
Finding a Location for Your HDTV
Here are some things you should consider when deciding on a proper location for your HDTV:
! The power consumption of your HDTV is about 57.1W (M320NV) and 56W (M370NV) (AVG
! Use the included power cord.
! When an extension cord is required, use one with the correct power rating. The 3-pronged cord
must be grounded and the grounding feature (3rd prong) must not be compromised.
! Install your HDTV on a flat surface to avoid tipping.
! For proper ventilation, you must allow space between the back of your HDTV and the wall.
! Avoid installing your HDTV in places with high humidity, dust, or smoke so you do not shorten the
service life of the electronic components.
! Install your HDTV in a level, landscape orientation, with the VIZIO logo at the bottom to prevent
poor ventilation and excessive component damage.
! If you want to mount your HDTV on the wall, see below for additional information.
! Read this user manual carefully before installing your HDTV.
VIZIO offers professional installation services including home networking. Contact VIZIO for more
information on these services at 877-MYVIZIO (877-698-4946) or www.VIZIO.com.
Attaching the TV Stand
Note: We strongly recommend that two people perform the setup and assembly due to the weight and
size of the TV.
Unpack the TV and stand base:
1. Remove the two top foam end caps.
2. Remove the stand base and accessory box from packaging.
3. Remove the TV from the box and lay it face down on a clean, padded, flat surface.
Note: Make sure that the surface is free of debris to prevent the TV screen from getting scratched.
Attach the TV stand base:
1. Align the stand base to the back of the TV.
2. Insert the four screws provided and tighten.
To Next Page
Loading...
Need help?
General
