To Next Page

To Previous Page

Adjusting the CEC Settings

The CEC function on your TV enables you to control

HDMI-connected devices with the included remote without any

additional programming.

Not all HDMI devices support CEC. See your device’s

user manual for details.

To enable, disable, or adjust CEC settings:

1. Press the MENU button on the remote. The on-screen menu is

displayed.

2. Use the Arrow buttons on the remote to highlight the

Settings icon and press OK. The Settings menu is displayed.

3. Use the Arrow buttons on the remote to highlight CEC

Settings and press OK. The CEC Settings menu is displayed.

4. Use the Arrow and OK buttons to adjust each setting:

• CEC Function - To use CEC, you must select Enable.

• System Audio Control - When system audio control is on,

you can control your device’s audio using the TV’s remote

control.

• Device Discovery - Use this function to determine if your

device is connected and supports CEC.

5. Press the EXIT button on the remote.

USING THE HELP MENU

You can use the TV’s Help menu to:

• Display system information

• Reset the TV settings

• Restore the TV to its factory

default settings

• Get guided setup help for

the tuner and network

Vizio M3D550KD User Manual

Other manuals for Vizio M3D550KD