5
28
Renaming a Custom Picture Mode
Automatically-created custom picture modes are given generic
names, beginning with "Custom 1", but you can rename custom
picture modes to make them easy to remember.
To rename a custom picture mode:
1. Set the Picture Mode to an
existing custom setting. See
Adjusting the Picture Settings
on page 22.
2. From the PROFESSIONAL
PICTURE menu, use the Arrow
buttons to highlight Rename
Picture Mode, and then press
OK. The RENAME PICTURE MODE
menu is displayed.
3. Use the Arrow buttons to enter
a custom name using the
on-screen keyboard.
4. Highlight Done and press OK.
5. Press the EXIT button to exit the
menu screens.
Locking a Custom Picture Mode
Custom picture modes can be locked with a unique PIN to
prevent accidental changes to their settings.
To lock all custom picture modes:
1. From the PROFESSIONAL
PICTURE menu, use the Arrow
buttons to highlight Lock
Picture Mode, and then press
OK. The LOCK PICTURE MODE
menu is displayed.
2. Use the Number Pad on your
remote to enter a unique
4-digit PIN.
3. Highlight Save and press OK.
4. Press the EXIT button to exit the
menu screens.
To unlock all custom picture modes:
1. From the PROFESSIONAL
PICTURE menu, use the Arrow
buttons to highlight Unlock
Picture Mode, and then press
OK. The UNLOCK PICTURE MODE
menu is displayed.
2. Use the Number Pad on your
remote to enter your 4-digit PIN.
3. Make any desired changes to the picture modes.
4. Relock the picture modes, if desired. You must create a new
4-digit PIN.
5. Press the EXIT button to exit the menu screens.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
