4
17
The first time you turn on the TV, the Setup App will guide
you through each of the steps necessary to get your TV
ready for use.
Before you begin the first-time setup:
• Your TV should be installed and the power cord
should be connected to an electrical outlet.
• Your devices should be connected.
• If you have a wireless network, have the network
key ready.
• If you are connecting to your network with an
Ethernet cable, connect it to the Ethernet port on
the TV.
To complete the first-time setup:
1. Press the Power/Standby
button on the remote. The
TV powers on and the
Setup App starts.
2. Use the Left/Right Arrow
buttons on the remote to
highlight Home Use and
press OK.
3. Use the Up/Down Arrow
buttons on the remote
to highlight Home Mode
Setup and press OK.
Completing the First-Time Setup
4. Use the OK and Up/Down
Arrow buttons on the
remote to read and accept
the Terms of Service and
Privacy Policy for Yahoo! TV
Widgets.
When you are finished,
highlight Next and press
OK.
5. Select the name of your
wireless network from the
list of available networks
and press OK.
Enter the network key using
the on-screen keyboard,
then highlight Connect
and press OK.
6. Enter your First Name, Last
Name, Phone Number, ZIP
Code, and E-mail Address
using the on-screen
keyboard.
Highlight Next and press
OK.
To Next Page
Loading...
Need help?
General
