38
4Playing USB Media
Preparing Your USB Drive to Play USB Media
To display USB media, you must rst save your videos onto a USB ash drive:
• The USB ash drive must be formatted as FAT32.
• Files on the USB ash drive must end in a supported le extension ( .mp3, .jpg,
etc).
• The player is not designed to play media from external hard drives, MP3 players,
cameras, or smartphones.
Displaying USB Media
To display your USB media:
1. Connect your USB ash drive to the USB port on the side of the TV.
2. The TV will recognize the USB. Use the Arrow Keys on the remote to select the
content you want to play.
—or—
3. Select USB from the bottom streaming icons on the SmartCast Home
SM
page.
Removing the USB Drive from the TV
To safely remove your USB ash drive from the TV:
1. Turn the TV o.
2. Disconnect your USB ash drive from the USB port on the side of the TV.
The USB Media Player allows you to connect a USB ash drive to your TV and play
music, video, or photos.
Note: The image shown here is for illustrative purposes only and may be subject to change.
The actual number of ports and their locations may vary, depending on the model.
WARNING: Do not remove the USB ash drive while the TV is on.
Doing so may damage the drive.
TIP: You can display your photos in Fullscreen. Select the photo,
press OK, then highlight Fullscreen and press OK.
To Next Page
Loading...
Need help?
General
