VIZIO VR2 Remote User Manual
Version 8/8/2008 3
1.1
1.11.1
1.1 VIZIO Remote Control
VIZIO Remote ControlVIZIO Remote Control
VIZIO Remote Control
GUIDE – This button displays program information. Press this button once and the information for the
program being viewed is shown. Press it a second time and the Electronic Programming Guide will
appear in the screen.
POWER – Press this button to turn the TV on from the Standby mode. Press it again to return to the
Standby mode.
TV – Press this button to select TV.
AV – Press this button to select the Audio Video input. Pressing this button
repeatedly to toggle through the AV inputs. If S-Video is being used, then AV
will show the signal going through this input as the S-video takes priority.
COMPONENT – Press this button to select the Component (YPbPr) input.
Pressing this button repeatedly will toggle through the Component
(Component 1 and component 2) inputs.
HDMI – Press this button to select the HDMI input. Pressing this button
repeatedly will toggle through the HDMI (HDMI1, and HDMI 2) different inputs
MENU – Use this button for the On-Screen Display (OSD) menus. When used
within the OSD menus, pressing this key will make the selection of an option.
These buttons navigate the On-Screen Display (OSD).
MUTE – This button turns the sound on and off.
LAST – This button recalls the previously viewed channel when it is used in
TV mode. This button also has different functions when being used in
conjunction with the On-Screen Display (OSD) menu.
VOL (+ or -) – These buttons turn the volume up or down.
CH (+ or -) – These buttons change the channels up or down.
Number Button Pad – Use these buttons to select a channel or enter a
password.
INPUT – This button allows the user to cycle through the inputs. Repeatedly
pressing this button will step through the input sources in the following
sequence: TV, AV (S-Video), Component1, Component2, RGB, HDMI1 and
HDMI2.
- (DASH) – When selecting a digital channel directly, use this button for the
separation of main and sub-channels. For example, channel 28-2 would be
selected by the button sequence 2 8 DASH 2.
To Next Page
Loading...
Need help?
General
