VIZIO VUR5 Universal Remote User Manual
Version 8/8/2008
www.vizio.com
3
1.0 VIZIO Universal Remote
1.0 VIZIO Universal Remote 1.0 VIZIO Universal Remote
1.0 VIZIO Universal Remote Control
ControlControl
Control
The VIZIO Universal Remote Control is a comprehensive remote that can be used to control up to four different
components. The remote button functions are explained on the following pages.
SET – This button starts all programming of the Remote Control.
Remote LED – Blinks when the remote operates.
POWER – Press this button to turn the TV on from the Standby mode. Press it again to
return to the Standby mode.
TV – This button has been pre-programmed to select the codes to operate a VIZIO TV.
VCR – This button selects a programmed VCR.
CABLE – This button selects a programmed cable TV set-top box or a satellite TV set-top
box.
DVD – This button selects a programmed DVD player.
Number Button Pad – Use these buttons to select a channel or enter a password.
INPUT – This button allows the user to cycle through the inputs.
- / ENTER – This button works as a DASH button in the DTV mode. When selecting a digital
channel directly use this button for the separation of main and sub-channels. For example,
channel 28-2 would be selected by the button sequence 2 8 ENTER 2.
CH (+ or -) – These buttons change the channels up or down.
LAST – This button recalls the previously viewed channel.
MUTE – This button turns the sound on and off.
VOL (+ or -) – These buttons turn the volume up or down.
MENU – Use this button for the On-Screen Display (OSD) menus.
INFO – This button displays the image and system information display.
GUIDE – This button displays program information. Note: this button is only functional for
DTV.
EXIT – This button exits the On-Screen Display (OSD) menus.
- These buttons navigate the On-Screen Display (OSD).
OK – Use this button to select your chosen option in On-Screen Display (OSD) menus.
To Next Page
Loading...
Need help?
General
