Vizio VW32L HDTV40A - 2.9 Setting Up to Watch Television; 2.10 Basic LCD HDTV Start Up

~vl2lo°
3.4:; $3-*3:t'§s-ac; up irc: wafch Teisauisian
For ‘Preparing Your LCD HDTV for Wall Mountmg’, see page 6.
3.3.0 Basic: LCD %—~iB’§“%.i F-£‘zi**ar°‘£' Up
1. Connecting the Power Cable
VW321. HDTV4CA User Manual
Connect me power cord to the power cord connector on the back of the High Definition TV, and
then plug the pewar cord into an AC wall socket.
2, Connect Audio and Video Cables to the HDTV
{see pages 13 ~ 25 for detailed steps} 7
3. Turning Power On l
Once all the oomponems are connected, press the Power ON button on the side of the High
Definition W, or press the Power ON {Red} button on the remote control.
4. Initial Setup
After powsring an the TV set, ma lnitial
Setup screen will came up; glease press
theflbutton en the remate control.
initial Setup
léiial smug
al The Language choice screen wm
be dfisplayed; the default English
option is highlighted. ff you wish
:0 change the CS0 language to
Espafiol or Frangais, press the §
buttun ontha ramcte control to
select the language yeu want.
Press the button on the
remote to go to the next screen.
Note: At this palm, 5? a Set-Tap Box from your Luca! Cable or Satellite Service Cempany or ether
equipment is being used; please press the LAST key an theremote control and go 10 Step 5. if :his is not
year case, please ccniinue at Step b.
27
www.VlZlO».cem.
versian 8!‘18{20(38
V1268’? 001 1361