Vizio VW32L HDTV40A - 2.11 Watching a TV Program

V1230’ vw32L HDTV4GA‘ User Manual
3.33. watmhinq a ‘ma ;==»s-mg:-am
Before you start watching TV, pieasa make sure that any came, sateflite or off-air antenna connections
are secure. Arse, verify that the power card is plugged into a correctly grounded eiectrical oufiet er surge
protector.
1. Press the 1D0Wer button on the remote or on the side of the High Definition TV. The V1210-
Iogo on the from win change from orange to white.
2. There are 3 options for sefiecting your programming:
‘as. if ycu are using an antenna or came connected through the DTWTV CABLEIANTENNA
input, you can select TV directly by pressing the TV but’ton~ an the remote, or by pressing
the NPUT button on the remote or onrthe side cf the High Definiiion TV.
13. if you are watching broadcasts through a ssabie or sazeiiite setfitop box connected by an
HUM! cable, seiect HDMI directly by pressing the HDMI button on the remote, or by
pressing the INPUT button on the remote or on the side of the High Befirmtion TV.
c. if you are watching broadcasts through a cabie or sateiiite settop box connestect by a
Component {YPbPr) came, seiect Component directly by pressing the Component buncn
on the remote, or by pressing the INPUT buficn on the remote or on the side of the High
Definition TV.
Nate: You should be ame to see a picture. If you do not,
make sure then all of the HDTV connections are secure and
you have seiected the correct video input source.
3. when using optson 2a, press the Shame! buttons on the remote or the CH4» 1' CH— buttans on
the side of the High Definition TV no change the channet. Mate: The Cinannel Ezuitcns, en the
side 0.‘ the Hégh Qaafinstaen TV and an the remote. canrra! win ’nr2t work if you are waiziiairsg a
<;rz‘ogra.m using HDMI, Cempcnerat arm AV inputs.
Version 8!? 812008 32 _ ‘
www.VlZIO.c0m T ' T ‘ ‘ — Wei
VIZ687 0011366