Vizio VW32L HDTV40A - Page 6

vxzso” vw32:_ HDTV4GA Usar Manna!
Ps“*.c3par'inz:5 Vmur 1.12:) 5-*§§3”§"‘\§» ‘Far wait. ?s“is.:es...ar*ri‘:§r*<Q
The V1210 VW82L HDTN/40A can either be kept on the stand bass or mounted an the waié fo: wewing. if
you choose ta mount the VW32L HDTV40A on the wall, please ioilow the instructions beiow for removing
the stand base. ’
‘Firs remmwe fiche grand base
1. Unplug at! of the cabies and cords
from your V1230 VWSQL HDTV40A.
2. Place the VWSEL HDTV4C«A face
down on a soft and flat surface
(blanket, foam, ckafiw, sic) tn prevent
any damage to the TV.
3. Remove the eight (8) screws homing
thebase to the VW32L HDTV-40 L
4. Caxefuiiy remove the stand base.
Now, the VW32L %~1DTV4OA can fit secureiy to
a mount (said separateiy) by utiiizing the
mounting holes in the center of the back pa =: A
ef the High Definition TV. Please maike sure to V
read the instructions of Wu: specific mount ta
propefiy hang the VW32L HDTVIKJA.
The pitch of the mounting mies is 420mm
horizontaity and 200mm vsrticaisy.
The screw type required is memo M8. 3 .25mm
pitch. The tength of the screws will depend on
the thickness data being attach to the TV set,
cur brackets some with different ¥e-rzgth
screws.
To find the perfect mount for the VIZVIO vW32L HDTV49A, browse V¥230’s eeriéfied mount seiection at
_;@.\?Iz!O.comj or cats: directly 888-VJZIOCE {888—849—4623).
Versian SI1 8/ZOQ8 6
wwwzviziacom ‘
VIZ687 091 1340