Vizio VW32L HDTV40A - Chapter 1 Basic Controls and Connections

v:z:o° VWSZL HDTVIKEA User Manual
Chapter .1 Baaicz CIQfi‘§‘."3“‘“‘£'.‘i1.$ arm: Ccsfiflfiaficnss
1.1 Frank Panel.
Power ‘VIZIO’ tight - The WZIO name lights white when
powered on and mange when powered off. 7
Remote Control Sensor - This is the window through which
an of the remote control signals pass to the sensor. Point the
remote control direcfly at this window for the best response to
the Iemete signal.
1.2 Right“ Side Pang. Eanfrrslxea
Power { 53'“ }- Switch the VW322. HDTV40A on by pressing the button cnce. Press the button again to
the VW32L HDTXMOA off.
new ~ This button activates the on Screen Dismay (080).
if a sub—menu 35 active, pressing this button wiii return in the
previous menu testes. ‘
Channel +;’- - Lise these buttons to step up or down the TV
channeis. While the OS!) is active, these buttons function as
up and down ccntrais in the OSD menus.
Vemme +I- —- use these buttons to increase or decrease to
the speaker voiume. Whiie the OSD is active, these buttons
function as ieft and réght controls in the OSD menus.
Input ~ Repeated pressing of this buttons steps zhreugh the 7
input sources in the
fwwm w» Av
{SNIDEO}, Compenent 1, ~ 7 LL 7 T T
Component 2, RGB, HDMH
and HDML2. Once you have
stepped through the entire
sequence, yea win retain ta
the beginning.
Version 811 812008 V 9
www.V!ZiO.com V
VIZ687 0011343