ViziT BUD-420M - User Manual

BUD 420
BUD 420
PARTS LIST
SAFETY INSTRUCTIONS
WARNING 3 V
-М
-М
VIZIT
200
!20
Control Unit the Control Unit hereinafter) is a part of multi-apartment doorphones and video doorphones
, and provides duplex intercom and remote entrance door unlocking.
The Control Unit enables connection of up to subscribers (apartments)
The Control Unit contains dangerous for life high voltage
Unplug the unit before replacing fuses and connecting wires. To avoid damage or electric shock do not make any repair
when the power is on.
The mains plug shall remain readily operable.
No metallic objects shall penetrate into ventilation openings of the unit. The unit shall not be exposed to dripping or
splashing, and no objects filled with liquids shall be placed on the unit.
(
.
.
Control Unit’s Appearance
1
1
2
3
4
5
6
1. Openings for screws
2. Mains cord
3. Mains switch
4. Holder for fixing the Control Unit on a DIN-rail
5. Terminals to connect to doorstation and lock
6. Terminals to connect to intercom line
Control Unit BUD-420M
Screw 3.5x40
Concrete Insert 46х 0
x4 x4
Operating Instruction
x1
FastenersFuses
x1
T200mAL
х1
TAL1
x1
1

Summary

System Components and Features

INSTALLATION

CONNECTIONS

Terminal Connections Overview

Details for connecting doorstation, locks, buttons, and intercom lines via terminals.

PROGRAMMING MODES

System Setup

Configuration using switches and jumpers on the Control Unit's PCB.

Switches Functions

Explanation and function of system setup switches for configuration.

Service Settings

Introduction to settings managed via the doorstation keypad and their modes.

Service Settings Procedures

Key Management

Advanced Programming Features

Table of Correspondence Setup

FUNCTIONAL CHECK AND ADJUSTMENT

OPERATION

Door Unlocking Methods

Subscriber Key Management

PRIORITY

ViziT BUD-420M Specifications

General

Brand	ViziT
Model	BUD-420M
Category	Control Unit
Language	English