To Next PageTo Next Page
Need help?Do you have a question about the Viztek Ultra U-Arm and is the answer not in the manual?
Details the primary shipping container for the U-arm system components and its packing list.
Lists all components included in the second shipping crate, including generator and accessories.
Details the contents of the third crate, primarily the stand box.
Itemizes all components shipped on the main pallet, including multiple crates and boxes.
Lists specific cables and boards required for the panel system setup and integration.
Provides step-by-step instructions for assembling and positioning the main system stand.
Details site inspection and pre-installation requirements for the generator unit.
Illustrates the electrical connections between the panel, generator, and PC for system operation.
Explains the specific jumper settings required on the generator for proper functionality.
Outlines the steps for configuring the generator via the technician service mode on the PC.
Guides the user through the automatic calibration process for the generator settings.
Provides instructions for calibrating the various mechanical and positional aspects of the stand.
Details network configuration and calibration for integrated Ultra and Toshiba system components.
Step-by-step guide to calibrating the Automatic Exposure Control (AEC) for Sedecal generators.
Describes how to verify and adjust the anti-crushing safety mechanisms on the column.
Provides solutions for common issues encountered during installation and operation.
A comprehensive checklist for all steps required during the system installation process.
Outlines the final system tests and checks before the unit is ready for clinical applications.
General| Brand | Viztek |
|---|---|
| Model | Ultra U-Arm |
| Category | Medical Equipment |
| Language | English |
