Setting functions
Language Set: Please choose your familiar language(CN-Simplified
Chinese,TW-Traditional Chinese,EN-English)
Sound switch: turn on/off the buzzer
Speed Alarm: the default value is 150 (the default value can be changed,push
left is to decrease,push right is to increase)
Coolant alarm：default value is 120°, it means this device will give alarm
when Coolant temperature is over 120°
RPM alarm: default value is 6000 r, it means this device will give alarm when
RPM over 6000 r
BAT Alarm: default value is 10.5V, it means this device will give alarm when
battery voltage is lower than 10.5V
Speed Adjust: adjust the speed according to the dashboard,default value is
107%
Speed Offset: When the vehicle turns off,but the device speed is not 0, then
adjust the device Speed Offset value, if the device speed shows 5KM/H, then
change the device Speed Offset default value at 5
BAT Adjust:if the battery voltage is different with the vehicle,it can be
adjusted.
Engine Size: the default value is 1.6 L, if the fuel consumption is much
different with the dashboard,please change it as the Displacement size
Fuel adjust:default value is 100%,it can be adjusted
Change Color1: top speed part in default interface
ChangeColor2: left part/middle part in default interface
ChangeColor3: right part/buttom part in default interface
Brightness :0 is automatic adjustment,1-8 is manual adjustment,1-darkest,8-
most bright
CWT Unit : default coolant temperature is °C,also can be changed to
Speed unit: default is Km/h,can be changed to MPH
To Next Page
Loading...