VM Audio SRA1200.4 Shaker Series - User Manual

SRA1200.4
4 CHANNEL AMPLIFIER

Summary

Introduction

Functions

Front Panel

Details the front panel controls and indicators of the amplifier.

Rear Panel

Details the rear panel connections and indicators of the amplifier.

Getting Started

Mounting

Provides instructions on how and where to mount the amplifier securely.

Wiring

Explains the proper routing and connection of electrical wires for the amplifier.

Installation

Power Connections

Power

Details the connection of the amplifier's power supply from the battery.

Remote

Explains how to connect the remote turn-on wire for automatic amplifier activation.

Ground

Details the proper grounding procedure for the amplifier to the vehicle chassis.

Audio Input

4-Ch Connection

Illustrates how to connect four audio input channels from the stereo.

Split 2-Ch Connection

Shows how to use Y-adapters to connect two audio inputs to four channels.

Speaker Wiring

Full Range Speaker Wiring

Guides on connecting full-range speakers to the amplifier outputs.

Component Speaker Wiring

Illustrates wiring for component speakers, including crossovers.

Subwoofer Bridge Wiring

Details how to wire subwoofers using the amplifier's bridged output.

Controls

Description

Explains the function of each control knob and indicator on the amplifier.

Calibration

Setting Gain

Step-by-step guide to properly set the amplifier's input gain.

Setting Bass Boost

Instructions on how to adjust the bass boost level for optimal sound.

Troubleshooting

No Sound?

Provides steps to diagnose and resolve issues when no audio output is produced.

Distorted Audio?

Offers solutions for problems related to distorted audio output from the amplifier.

Reduced Bass?

Explains potential causes and fixes for reduced bass response.

Amplifier Fuse Keeps Blowing?

Addresses issues where the amplifier's fuse repeatedly blows.

Whining Noise When Engine Is On?

Helps troubleshoot and eliminate whining noises that occur when the engine is running.

Amplifier Shuts Down After Playing For A Period Of Time?

Explains why the amplifier might shut down due to thermal protection.

Specifications

Models

Lists the model name and its specifications.

Consumer Limited Warranty Agreement

Mobile Electronics Limited Warranty

Details the limited warranty terms for mobile electronics products.

Instructions for Claiming Warranty Service

Provides steps on how to obtain warranty service for the product.

Your Warranty Service Does Not Cover the Following

Lists exclusions from the product's warranty coverage.

Warranty Turnaround Time

Informs about the expected time for warranty service processing.

International Warranty

Refers to warranty policies for international customers.

VM Audio SRA1200.4 Shaker Series Specifications