D700/750 E2-E3
Follow the procedure below.
1- Start the engine and bring it to
the operating temperature
(70÷80 °C).
2-Turn off the engine and remove
the ignition key.
3-Let the engine cool down prop-
erly.
4-Unscrew the plug (P).
Open the plug gently to drain the
pressure.
5-Top up, if necessary, from plug
(P). (As for the liquid quantity and type, see
"Technical data").
– When topping up, only use a mixture
with the same composition as the one al-
ready contained in the engine cooling
system.
– The fluid level must be up to the base
of the neck into which the radiator plug is
screwed.
– For further information, please con-
sult the documentation provided by the
manufacturer of the vehicle/device in
which the engine is installed.
ENGINE COOLANT LEVEL CHECK
To Next Page
Loading...
Need help?
General