- 51 -
C145301000.fm
English
Maintenance information
D700/750 E2-E3
11-Turn the engine on and keep it running
at idle speed for a few minutes to bring it up
to working temperature (70÷80°C).
If the coolant level drops, top up as need-
ed
12-Turn off the engine and let it cool down
properly.
13-Check the coolant level and, if neces-
sary, carry out topping-up (See "Engine
coolant level check").
Do not throw away any polluting material
in the environment. Carry out their dis-
posal in compliance with the relevant
legislation in force.
Follow the procedure below.
1- Turn off the engine and remove
the ignition key.
2-Let the engine cool down ade-
quately to avoid being burnt.
3-Prepare a container to collect
any leak.
4-Unscrew filter (U) and replace
it.
5-Check the conditions of gasket
(V) and, if necessary, replace it.
6-Lubricate the seal of the new
cartridge before assembling it.
7-Install the oil filter.
Lock the screw to a torque of 12,7 Nm.
8-Turn the engine on and leave it running
at minimum speed for a few minutes until it
reaches working speed (70÷80°C).
9-Turn off the engine and remove the igni-
tion key.
10-Wait a few minutes so that all the oil will
flow into the sump.
OIL FILTER CARTRIDGE REPLACEMENT
Gasket (V)
IDM-45300901600.tif
Oil filter (U)
To Next Page
Loading...
