VM Motori MR704LX - User Manual

VM Motori MR704LX

62 pages

To Next Page

To Next Page

Loading...

MR 700

1

Ed. 3 - 2012_11

Ed. 3 - 2012_11

English

Engine instrucons manual

Table of Contents

Questions and Answers:

E
Elizabeth FloresAug 19, 2025
Why my VM Motori MR704LX does not start?
- J
  johnny93Aug 19, 2025
  Your VM Motori Engine might not start due to several reasons: * There may be air in the fuel supply circuit, in which case you should carry out bleeding. * The injectors could be dirty or faulty, requiring cleaning or replacement. * The injection pump might be incorrectly set or faulty, needing adjustment or replacement. * The start control may have failed and needs replacement. * A fuse might be triggered, so reset the fuse.
T
Tammy PetersenAug 21, 2025
What to do if the starter motor is not running on my VM Motori MR704LX?
- C
  Carla McconnellAug 21, 2025
  If the starter motor isn't running on your VM Motori Engine, consider these potential causes and solutions: * The battery might be flat, requiring a recharge or replacement. * There could be an interrupted electrical connection, necessitating a check of the electric connections. * A fuse might be triggered, so reset the fuse.
J
John BlackwellAug 23, 2025
How to fix a VM Motori MR704LX when the control board and engine do not start during ignition?
- N
  nicholassantiagoAug 23, 2025
  If the control board and engine of your VM Motori Engine fail to start during ignition, the following could be the reasons: * The battery could be flat, so recharge or replace it. * A fuse might be triggered; reset the fuse. * The electric cables may be disconnected or not guaranteeing continuity, so check the electric connections. * The engine revolution sensor may have failed and needs replacement.
J
Justin StewartAug 26, 2025
What to do if my VM Motori Engine stops after ignition?
- D
  danielmillerAug 26, 2025
  If your VM Motori Engine stops after ignition, here are some possible causes and solutions: * There might be air in the fuel supply circuit, requiring you to carry out bleeding. * The fuel filter could be clogged, so replace it. * The injection pump might be incorrectly set or faulty, needing adjustment or replacement. * The electric cables may be disconnected or not guaranteeing continuity, so check the electric connections.
B
Brittany SmithAug 28, 2025
Why does the coolant temperature warning light come on in my VM Motori MR704LX?
- M
  Mark HallAug 28, 2025
  The coolant temperature warning light in your VM Motori Engine might activate due to: * Low coolant levels, so adjust the engine coolant level. * A stuck overpressure valve of the load plug, requiring replacement with a 1 bar valve. * A broken or worn belt, needing replacement.
A
alejandrocastroAug 30, 2025
How to troubleshoot a VM Motori Engine that does not reach operating speed?
- M
  Mario TurnerAug 30, 2025
  If your VM Motori Engine isn't reaching operating speed, consider these potential issues: * The fuel filter might be clogged, so replace it. * There could be air in the fuel supply circuit, requiring bleeding. * The injection pump might be incorrectly set or faulty, needing adjustment or replacement. * The injectors could be dirty or faulty, requiring cleaning or replacement. * The air filter might be clogged, so clean or replace it. * There might be an overload, so reduce the load.
J
Jeffrey SpearsSep 1, 2025
Why is there an output reduction in my VM Motori MR704LX?
- T
  Terry RussellSep 1, 2025
  An output reduction in your VM Motori Engine could stem from: * A clogged fuel filter, so replace it. * Air in the fuel supply circuit, requiring bleeding. * An incorrectly set or faulty injection pump, needing adjustment or replacement. * Dirty or faulty injectors, requiring cleaning or replacement. * A clogged air filter, so clean or replace the filter. * Insufficient accelerator stroke, so adjust the accelerator stroke.
K
Kyle KnightSep 3, 2025
What causes abundant white smoke from the exhaust pipe of a VM Motori MR704LX?
- C
  craig62Sep 3, 2025
  Abundant white smoke from the exhaust pipe of your VM Motori Engine may be caused by: * A clogged seawater filter, so clean or replace the filter. * Burnt gasket head. * Engine overheating due to clogged coolers, so clean the coolers. * A worn seawater pump impeller, so replace the impeller. * A broken or worn belt, needing replacement. * Failure of water temperature sensor, so replace the sensor.
A
Ashley BradySep 5, 2025
Why is my VM Motori MR704LX Engine emitting black smoke from the exhaust pipe?
- T
  Theresa GlennSep 5, 2025
  The emission of black smoke from the exhaust pipe of your VM Motori Engine could be due to: * Dirty or faulty injectors, requiring cleaning or replacement. * An incorrectly set or faulty injection pump, needing adjustment or replacement. * A faulty turbocharging turbine, so replace the turbine.
S
stevenbryantSep 7, 2025
What should I do if the pressure gauge shows low engine oil pressure and the warning light is on for my VM Motori MR704LX?
- H
  hernandezgeorgeSep 8, 2025
  If the pressure gauge shows too low engine oil pressure and the warning light is on for your VM Motori Engine, it could be due to: * Failure of the pressure gauge, so check or replace it. * Oil level too low, so adjust the oil level. * Oil pump failure, so check or replace the pump. * A faulty sensor, so check and, if appropriate, replace the sensor.

VM Motori MR704LX Specifications

General

Brand	VM Motori
Model	MR704LX
Category	Engine
Language	English

Summary

GENERAL INFORMATION

Introduction and Quality Systems

Introduces the manual and details the company's quality and environmental certifications.

MANUFACTURER AND ENGINE IDENTIFICATION

TECHNICAL INFORMATION

Engine General Description

Describes the MR704-MR706 engines and lists their main components.

SAFETY INFORMATION

Safety Rules

Outlines essential safety rules for operating and handling the engine.

HANDLING AND INSTALLATION INFORMATION

Handling, Packaging, and Transport

Provides guidance on safe handling, packaging, and transport of the engine.

OPERATING INFORMATION

Control Board Description

Explains the function of each gauge and indicator on the engine's control board.

MAINTENANCE INFORMATION

Recommendations for Maintenance

Stresses the importance of regular maintenance for performance and longevity.

CHECKS AND CONTROLS

Fuel Circuit Bleeding and Screw Tightening

Details procedures for bleeding the fuel circuit and tightening screws/unions.

INFORMATION ABOUT FAILURES

Troubleshooting Overview

Introduces troubleshooting by identifying and solving engine anomalies.

COMPONENT REPLACEMENT

Belt Replacement

Provides instructions for replacing the engine's drive belt.

ELECTRICAL SYSTEM

Engine Electrical Diagram - MR704

Presents the electrical wiring diagram for the MR704 engine model.

Related product manuals

VM Motori MR704LH

VM Motori MR706LX

Preview: VM Motori MR 700

VM Motori MR 700

Preview: VM Motori D703E2

VM Motori D703E2

VM Motori D703E3

VM Motori D753IE3

VM Motori R754IE4

VM Motori D754TE3

VM Motori R756EU5

VM Motori D704TE2

VM Motori R754EU5

VM Motori D756IPE2