VM Motori MR704LX - Engine.oil.level.control; Engine.coolant.level.check

MR 700
40
Ed. 3 - 2012_11
English
ENGINE OIL LEVEL CONTROL
Follow the procedure below.
1 -Start the engine and bring it to the
operating temperature (70÷80 °C).
2 -Turn off the engine and remove the
ignition key.
3 -Place the engine on a perfectly level
surface.
4 -Wait a few minutes so that all the oil
will ow into the sump.
5 -Remove the dipstick (L) and check the
oil level.
6 -Top up, if necessary, from plug (M). As
for the oil quantity, see “Specications”.
Important
The oil level should be inclu-
ded between the minimum and
maximum marks. Do not mix
oils of different brands or with
different features (see “Re-
commended lubricants”)..
ENGINE COOLANT LEVEL CHECK
Follow the procedure below.
1 -Start the engine and bring it to the
operating temperature (70÷80 °C).
2 -Turn off the engine and remove the
ignition key.
3 -Let the engine cool down properly.
4 -Unscrew the load plug (P).
Warning - Caution
Open the plug gently to drain the
pressure.
5 -Top up, if necessary, from plug (P).
As for the liquid quantity and type, see
“Specications”.
Important
The liquid level should be included
between the minimum and maximum
notches printed on the expansion
chamber.
dipstick (L)
load plug (M)
load plug (P)
Tech Library http://engine.od.ua