MR 700
13
Ed. 3 - 2012_11
English
FUEL SUPPLY CIRCUIT
MR704 MR706
Type of injection Common Rail direct injection
Type of fuel
The engine has been designed to be powered by
standard fuels available on the European market
(according to specications DIN EN 590). If it is to be
powered by BIODIESEL fuels (according to specica-
tions UNI EN14214), it can be mixed, up to 5%, with
fuel available on the European market (according to
regulation DIN EN 590).
Important
Do not use fuels with specications other
than those indicated.
Fuel supply
Gear pump integrated in high pressure injection
pump
Injector supply High pressure injection pump
LUBRICATION CIRCUIT
Type of lubrication
Forced lubrication
Circuit fuel supply
Rotor pump
Oil change including lter
(standard sump)
litres (kg) 9 (8) 13,8 (12,3)
Oil quantity at minimum
level (standard sump)
litres (kg) 5,6 (5) 9 (8)
Oil quantity at maximum
level (standard sump)
litres (kg) 7,3 (6,5) 12,3 (11)
Oil pressure at minimum
speed (with started engine)
bar 1 -4 1 - 4
Alarm for oil pressure too
low
bar 0,4 0,4
Oil cooling Oil/water cooler
To Next Page
Loading...
