VMAX VX1 User Manual

11
VX1 User manual
CHARGING PROCESS
ATTENTION:
Your device requires regular charging. Proceed as follows:
• Fully charge the li-ion battery before initial operation and do
not interrupt the charging process. Also do not switch on or
operate your device during the charging process.
• Make sure that the charger plugs and the charging socket are
dry before charging and that there is no dirt or dust in or on
them.
• Connect the charging plug to the charging socket on your
e-scooter.
• Connect the charger to the power socket via the power plug.
• During the charging process, the LED control lamp on the
charger lights up red.
• Once the li-ion battery of the e-scooter is charged, the LED
indicator light on the charger will turn green and you can
remove the charger.

VMAX VX1 Specifications

General

Brand	VMAX
Model	VX1
Category	Scooter
Language	English