Need help?Do you have a question about the Vocalist Live 3 and is the answer not in the manual?
General| Type | Vocal Effects Processor |
|---|---|
| Effects | Reverb, Delay, Chorus, Pitch Correction |
| Footswitch Control | Yes |
| Power | AC Adapter |
| Inputs | 1 XLR, 1 1/4" |
| Outputs | 1 XLR, 1 1/4" |
Describes the primary functions of the Vocalist Live 3 for guitarists.
Crucial safety precautions to protect users and the device from hazards like liquid exposure and electrical shock.
Official statement confirming the product meets safety and EMC directives and standards.
Details the terms, conditions, and limitations of the product's warranty coverage.
An introduction to the Vocalist Live 3, highlighting its capabilities and target audience.
Explanation of the proprietary musIQ® technology for automatic vocal harmony generation.
Summarizes the core functionalities including automatic harmony, pitch correction, and effects.
Lists the items included in the package and provides essential safety tips for initial setup.
Explains the vocal and guitar signal strength lights and the tuner bar indicators.
Details display, patch selection, EQ, compressor, and warmth controls.
Explains pitch correction, guitar mix, and reverb controls.
Covers footswitches (Part A/B, Effects, Harmony) and delay controls.
Explains harmony mix, humanize, setup, and patch selection controls.
Details the voicing buttons and the voicing/gender displays.
Describes the gender display and gender buttons for modifying harmony voice character.
Details the input gain control and the combo jack for vocal input.
Explains guitar input/thru connections, stereo/mono selection, and XLR outputs.
Describes the ground lift switch for hum reduction and the power adapter connection.
Guides on connecting the device for use with a separate guitar amplifier.
Instructions for routing the guitar/vocal mix to a PA system via XLR outputs.
How to set the guitar input sensitivity based on signal strength indicators.
Explains the importance of guitar tuning and how to set the vocal input level.
Prepares users for adjusting effects and selecting harmony settings.
Details how to use the Warmth, Compressor, and EQ controls for vocal tone shaping.
Information on the fixed low-cut filter and noise gate settings accessible via the Setup Menu.
Explains the Pitch Correct amount control and the Reverb effect with its room size options.
Details the delay effect and how to select different delay times using the dedicated buttons.
How to enable/disable effects and access the guitar tuner using the footswitch.
Explains how to save, recall, and manage harmony settings using patches and A/B parts.
Guides on toggling between harmony parts and selecting voicing options for harmony voices.
Details the controls for adjusting harmony gender, mix level, and humanize parameters.
Explains how to enable or bypass the harmony voices using the dedicated footswitch.
How to adjust the guitar input sensitivity setting via the Setup Menu.
How to configure the harmony footswitch for toggle or momentary operation.
Instructions for enabling/disabling the low-cut filter and setting the chorus depth.
Details on adjusting chorus speed, guitar reverb send level, and noise gate threshold.
Step-by-step instructions to restore the device to its original factory settings.
Detailed technical specifications for mic preamp, line input, outputs, and audio performance.
Provides power requirements, physical dimensions, and weight of the Vocalist Live 3.
To Next Page