9
4.USE Instructions
chart 1
1
2
3
4
3. Nebulization
a:direct inhalation b: by mouthpiece
c: By mask
Air intake
Air intake
1) Prepare: Clean and disinfect the components and spray nozzle when used.
2) Inject the liquid: Turn the grey cap counter-clockwise to open, add saline to cup, then screw the cap closed again.
Note: do not exceed the maximum capacity of the saline cup, the maximum capacity can be seen on saline cup scale.
1) Click (ON/OFF) to power on, start nebulization
2) Hold the nebulizer upright to keep the liquid in contact with the nebulization mesh. Use any of the following
three inhalation methods according to individual needs.
To Next Page