VocaTime Talking Atomic Dual Voice Analog Watch User Manual

1
Instruction Manual
Talking Atomic, Dual Voice, Analog Watch
(USA-EURO Multi-Band)
IMPORTANT: Upon arrival if watch hands are NOT moving it is in sleep mode.
To begin using you must WAKE the watch up using the following procedure:
To Wake Up:
Press any button for 3 seconds. After the watch wakes up, the hands will spin to match
the internal time. Wait until the watch resume normal running.
Thank you for choosing the VocaTime Talking Atomic Watch!
Your Atomic, Dual Voice, Analog Talking Watch, features advanced technology which
provides highly accurate and precise time. The integrated self- setting Multi-Band
Atomic Radio in this watch is able to pick up the Atomic radio signals from within the
Continental USA, UK, GERMANY and JAPAN (60Khz only). In addition to the
automatic settings this watch also allow for manual setting when needed.
How Atomic function works: It receives a signal from the Atomic Clock, (which for
example In the USA located in Colorado) and measures each second of time as 9,192,631,770
vibrations of a cesium 133 atom in a vacuum, which is accurate to 1 second every million years.
Your Atomic Radio Controlled Watch even accounts automatically for daylight saving time.

VocaTime Talking Atomic Dual Voice Analog Watch Specifications

General

Type	Analog Watch
Voice Feature	Yes
Dual Voice	Yes
Atomic Timekeeping	Yes
Display	Analog
Time Synchronization	Radio-controlled

Summary

Getting Started with Your VocaTime Watch

To Wake Up Your Watch

Procedure to wake the watch from sleep mode by pressing any button for 3 seconds.

Automatic Time Setting

Button Functions Overview

Announcing Time and Date

Checking Reception Status

Alarm Setting Basics

Atomic Radio Signal Reception

Optimal Signal Reception Positions

Guidance on positioning the watch for optimal atomic radio signal reception.

Country Signal Selection

Instructions for setting the watch to receive signals from specific countries (USA, UK, Germany, Japan).

Manual Signal Reception and Time Setting

Manual Signal Reception Procedure

Manual Time Setting Guide

Alarms and Hourly Chimes

Setting a Daily Alarm

Detailed steps for setting a daily alarm time on the watch using the buttons.

Troubleshooting and Maintenance

General Troubleshooting Tips

Re-calibrating the Second Hand

Steps to re-align the second-hand if it becomes misaligned due to knocks or vibrations.

Watch Not Receiving Time Signal

Lists common reasons for failure to receive the atomic time signal and solutions.

Battery Replacement Guide

Watch Restart Procedure