To Next PageTo Next PageWhy is there a loud squealing noise coming from the VocoPro DA-1000Pro Processor speakers?
A loud squealing noise from the speakers usually indicates that the microphone is too close to the speakers or the microphone volume is too high. Try increasing the space between the microphone and speakers, or turning down the microphone volume. You might also try lowering the treble levels.
What to do if no output is being transmitted from my VocoPro DA-1000Pro Processor?
If no output is being transmitted, the input selector (DVD/CD+G) might be set to the wrong position; switch the source button to the correct source channel. Also, ensure the cables from the output jacks on the DA-1000 Pro are correctly connected to the input jacks on your external equipment. Check the overall cabling and viability of external equipment and ensure the power cord from the DA-1000 Pro is plugged into a wall outlet.
General| Input Channels | 2 |
|---|---|
| Output Channels | 2 |
| Frequency Response | 20Hz - 20kHz |
| Signal to Noise Ratio | > 90dB |
| Total Harmonic Distortion | < 0.05% |
| Effects | Reverb, Echo, Chorus |
| Inputs | 2 x RCA |
| Outputs | 2 x XLR, 2 x 1/4" TRS, 2 x RCA |
| Power Supply | 110V - 220V, 50/60Hz |
Important safety advice regarding electric shock, fire risk, water exposure, and proper use.
Details on the power switch and how to select between A/V input sources.
Explanation of Voice Cancel and Voice Partner features for vocal manipulation.
Describes output level displays and master controls for music volume, bass, and treble.
Covers master and individual mic level controls, plus mic bass and treble adjustments.
Step-by-step guide for connecting external audio and video sources to the mixer.
Instructions for connecting the mixer's audio outputs to amplifiers or other audio devices.
How to connect the mixer's video output to monitors or TVs.
Recommended procedure for turning on the unit and connected equipment safely.
